Loading the Mixer, Cleaning the Mixer

UNLOADING THE MIXER

LOADING THE MIXER

Start the mixer. Refer to motor/engine instructions. After drum has started rotating, pour about half of the water in the drum.

NOTE: The drum my leak slightly when first used. This will stop after a few batches.

Add aggregate (gravel) first then cement and last sand.

Refer to Fig. 1

Allow the entire mixture to mix for one full minute. Do not stop mixer from rotating. Hold the tilt handle and unlock the stop lever. Dump concrete to either side by tilting the tilt handle in the direction required. Before reloading the mixer, slowly pour a pail of water over the lip of the drum, permitting water to clean the inside of drum. When cleaned, dump water. Now you are ready for your next batch.

CLEANING THE MIXER

After each run of concrete has been poured, do the following:

With the drum rotating, spray water into drum permitting the water to run down the inside and outside of drum. Add one shovel full of coarse aggregate and permit this mixture to scour the inside of drum for about two minutes.

This practice will help keep the drum clean, which is essential in obtaining the best mixing result. Never permit concrete to harden on either the inside or outside of drum.

EXTENSION CORDS-ELECTRIC MOTOR

The following size extension cords should be used for this mixer: length of cord, up to 100 ft- 14 gauge wire; up to 200 ft-12 gauge wire; up to 300 ft – 10 gauge wire; up to 400 ft – 8 gauge wire.

59015C specifications

The Gilson 59015C is a high-performance analytical instrument widely recognized for its exceptional capabilities in the field of liquid chromatography. Designed to meet the rigorous demands of laboratory environments, this model offers a range of features that enhance precision, efficiency, and ease of use.

One of the standout features of the Gilson 59015C is its advanced pump technology. The instrument is equipped with a high-pressure pump that delivers consistent flow rates, ensuring accurate and reproducible results. This pump system is engineered to minimize pulsation, which is crucial for achieving high-resolution separations in complex sample matrices. The model supports a variety of flow rates, making it suitable for both method development and routine analytical tasks.

Another significant characteristic of the 59015C is its modular design. This flexibility allows users to configure the system according to their specific analytical needs. The instrument can be integrated with various detectors, such as UV-Vis, fluorescence, and mass spectrometry, providing versatility for a wide range of applications. This adaptability makes the Gilson 59015C a valuable asset in many areas, including pharmaceuticals, environmental testing, and food safety.

The user-friendly interface of the 59015C further enhances its appeal. Equipped with a large, intuitive touchscreen, the instrument facilitates easy navigation through complex methods and protocols. Users can quickly set parameters, monitor system performance, and analyze results without the steep learning curve often associated with advanced analytical systems. The software also provides comprehensive data management features, allowing for efficient data analysis and reporting.

In terms of safety and maintenance, the Gilson 59015C includes built-in diagnostics and alerts to ensure optimal performance. The system is designed for easy access to components, streamlining routine maintenance tasks. This thoughtful design reduces downtime, allowing laboratories to maintain high productivity levels.

Overall, the Gilson 59015C is a robust and versatile liquid chromatography system that combines modern technology with user-friendly features. Its reliable performance, modularity, and ease of use make it an ideal choice for laboratories seeking to enhance their analytical capabilities while ensuring accuracy and reproducibility in their results.