GE Monogram ZBD4800 Care and Cleaning, Built-in Dishwashers Often Use an Air Gap. Keep It Clean

Page 11

CARE AND CLEANING

Clean the outer surface and door jambs with a

The inside usually takes care of itself. Keeping

lightly dampened cloth. Dry thoroughly. Do not

your rinse agent dispenser filled all the time will give

use abrasives or sharp objects, they can damage

the tub and inner door of your dishwasher a polished

the dishwasher.

appearance.

 

 

Not Using Your Dishwasher in Winter? Protect Against Freezing

What is

If your dishwasher is left in an unheated place during the winter, ask a service technician to:

Cut off electric power to the dishwasher. Remove fuses or trip circuit breaker.

Turn off the water supply.

Disconnect the water inlet line from the water valve.

Drain water from the inlet line and water valve. (Use a pan to catch the water.)

Reconnect the water inlet line to the water valve.

Pour 1 cup non-toxic antifreeze into the sump. (Non-toxic antifreeze available at recreational vehicle stores.)

Dishwasher-

Built-in Dishwashers Often Use an Air Gap. Keep It Clean

Safe

An air gap is a plumbing device. It protects your dishwasher against water backing up into it if a drain clogs. The air gap is not a part of the dishwasher. And you may not even have one. Not all plumbing codes require air gaps.

Check the air gap any time your dishwasher isn’t draining well.

TWO TYPES OF AIR GAPS

If you have an air gap, check it at least once a month. IT IS NOT PART OF YOUR DISHWASHER. IT IS NOT COVERED IN YOUR WARRANTY.

The air gap is easy to clean. With most types, first turn off the dishwasher, then lift off the chrome cover. Then unscrew the plastic cap and check for any buildup of grit. A toothpick makes cleaning easy.

Keeping Your Dishwasher Filters Clean

Your dishwasher has a filter system comprised of a central filter and a microfilter. At the end of each wash, remove the filter from the bottom of the dishwasher and make sure it is clean.

To check to see if the filter is clogged or dirty, first remove the lower wash arm by lifting it up and off. Turn the center filter assembly handle counterclockwise and pull out.

Remove the microfilter

 

by pulling it down

 

away from the center

 

filter assembly. Then

 

press the tabs on the

 

inner filter and remove

 

it also. Clean all filter

 

parts with water and a

 

stiff bristled brush.

 

To replace, line up the dome on

 

the tube, press down and lock

 

into place by turning clockwise.

 

Replace the wash arm.

 

Dome

Tube

Care and Cleaning

Keeping Your Dishwasher Wash Arms Clean

The wash arms should be checked on a regular basis to assure that the spray orifices are clear and unobstructed. If wash arms require cleaning they are easily removable.

The lower wash arm can be removed by pulling upwards. The upper wash arm is held in position by a knurled nut.

Clean with water and a stiff bristled brush and replace.

11

Image 11
Contents Monogram Use and Care Guide For ZBD4700 ZBD4800 Dishwasher If YOU Need Service Contents Help US Help YOU…Save These Instructions Important Safety InstructionsRead all instructions before using this appliance To Interrupt a Cycle HOW to Operate the DishwasherCycle Phase Lights Fill Rinse Aid Light DryingHelpful Hints How to Test Water TemperatureEnergy-Saving Tips Good Dishwashing Starts with HOT WaterHow to Choose and Use the Right Detergent How to Use a Rinse AgentDetergent Usage Guide powder or liquid How to Prepare the Dishes for WashingDetergent Dispenser Upper Rack Height Adjustment HOW to Load Your DishwasherHow to Load the Upper Rack Customizing Your Bottom Rack How to Load the Bottom RackWhat YOU can Usually Wash Safely Your Dishwasher Forget a Dish? Here’s When You Can Add ItKeeping Your Dishwasher Filters Clean Care and CleaningBuilt-in Dishwashers Often Use an Air Gap. Keep It Clean Problem Possible Cause QUESTIONS? USE this Problem SolverProblem Solver We’ll Be There Warranty Monogram. TM