GE Monogram ZV36SSFSS dimensions Dimensions and Specifications in inches, Installation Clearances

ZV36SSFSS – GE Monogram 36" Stainless Steel Professional Hood

Dimensions and Specifications (in inches)

12"35-15/16"

18"

25" 35-15/16"

Installation Clearances

These vent hoods are designed to be installed onto a wall or beneath a soffit or cabinet.

•Install these hoods* 30" Min. to 36" Max. above the cooking surface.

*These hoods may be installed 24" min. above a gas or electric drop-in style cooktop. Always observe the 30" to 36" clearance when installed over any professional style cooktop or range.

Note: Clearances may vary due to type of cooking product and local codes. Check with local inspectors to be sure standard is applicable.

Soffit Installation

SOFFIT

30" MIN. 36" MAX.

In this installation the ductwork running from the top of the hood will be concealed in the soffit or upper cabinetry.

Specification Created 10/02

Wall Mount Installation

30" MIN. 36" MAX.

For this installation, a decorative duct cover is available to conceal the ductwork running from the top of the hood. Use of the duct cover requires special consideration to the installation height above the countertop.

		For answers to your Monogram,® GE Profile™ or
	Listed by	GE appliance questions, visit our website at
	Underwriters	GEAppliances.com or call
R	Laboratories	GE Answer Center® service, 800.626.2000.