GE Monogram ZFSB25D SS, ZFSB26D SS Install Water Line, To move the refrigerator indoors

Page 7

Installation Instructions

 

 

 

 

 

STEP 1

ALL MODELS (continued)

REINSTALL DOORS

 

 

 

Refer to the illustration on page 5 or 6.

 

To move the refrigerator indoors:

• Carefully, route the water line tubing and electrical

 

• Place a piece of the carton or soft cloth against the

through the freezer side bottom hinge. Lower the door

 

side panel of the refrigerator to pad and protect the

onto bottom hinge.

 

stainless steel finish.

• Secure top hinge.

 

• Place the refrigerator on the handtruck with a side

• Insert the tubing all the way into the coupler.

 

against the truck only.

• Reconnect the wiring harness.

 

• Move the refrigerator indoors.

• Replace top filler strip (on model ZFSB26).

 

 

 

• Replace top cap with original screws and springs

 

 

 

(where present).

 

 

 

HINT: Use tape or Perma Gum to prevent the spring

 

 

 

from sliding off the screw (on model ZFSB26).

 

 

 

Follow the same procedure to reinstall the fresh food door.

 

 

 

 

STEP 2 INSTALL WATER LINE

•A cold water supply is required for automatic icemaker operation. The water pressure must be between 40 and 120 p.s.i.

•Route 1/4" OD copper tubing between house cold water line and the water connection location.

•Measure the distance from the water valve on the back of the refrigerator to the water supply line. Add 8 foot length to allow the refrigerator to be moved away from the wall after installation. Bend the tubing into 3 coils of about 10".

NOTE: The only GE approved plastic tubing is supplied in GE SmartConnect™ Refrigerator Tubing kits. Do not use any other plastic water supply line because the line is under pressure at all times. Certain types of plastic will crack or rupture with age and cause water damage to your home.

GE SmartConnect™ Refrigerator Tubing Kits are available in the following lengths:

2' (.6 m) – WX08X10002

6' (1.8 m) – WX08X10006 15' (4.6 m) – WX08X10015 25' (7.6 m) – WX08X10025

Shut off the main water supply.

Turn on the nearest faucet long enough to clear the line of water.

•Install a shut-off valve between the icemaker water valve and cold water pipe in a basement or cabinet. The shut-off valve should be located where it will be easily accessible.

NOTE: It is best to install the valve into a vertical water pipe. If you install the valve into a horizontal water pipe, make the connection at the top or side to avoid drawing off any sediment from the water pipe.

Compression Nut

Saddle Type

Shutoff Valve

Packing Nut

Outlet Valve

Ferrule (Sleeve)

•Drill a 1/4" hole in the water pipe.

•Fasten the shut-off valve to the pipe with pipe clamp.

•Tighten the clamp screws until the sealing washer begins to swell. Do not over tighten.

•Place a compression nut and ferrule (sleeve) onto the end of the tubing and connect it to the shut-off valve. Make sure the tubing is fully inserted into the valve and ferrule is tightened.

•Turn on the main water supply and flush debris. Run about a quart of water through the tubing into a bucket. Shut off water supply at the shut-off valve.

NOTE: Saddle type shut-off valves are included in many water supply kits. Before purchasing, make sure a saddle type valve complies with your local plumbing codes.

NOTE: Commonwealth of Massachusetts Plumbing Codes 248CMR shall be adhered to. Saddle valves are illegal and use is not permitted in Massachusetts. Consult with your licensed plumber.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Installation Instructions Before YOU Begin ContentsZFSB25 and ZFSB26 Product Dimensions and Clearances Installation SpaceAdditional Specifications Water And Electrical LocationsImportant Please read carefully Tools Required FlooringMaterials Required Grounding the RefrigeratorMove Refrigerator Indoors Model ZFSB25Model ZFSB26 Move Refrigerator Indoors Shut off the main water supply Install Water LineTo move the refrigerator indoors Against the truck onlyMove Refrigerator Into Position Connect PowerSkip this step when not using RO System Connect Water SupplyLevel the Doors To Adjust the RollersZFSB25 rear rollers can also be adjusted Level the RefrigeratorInstall Toekick Temperature ControlsStart Icemaker Page Pub. No Dwg. No D4577P002

ZFSB25D SS, ZFSB26D SS specifications

The GE Monogram ZFSB26D SS and ZFSB25D SS represent the pinnacle of luxury refrigeration, combining cutting-edge technology and exquisite design. These built-in side-by-side refrigerators are tailored for discerning homeowners seeking both functionality and style in their kitchens.

One of the standout features of both models is the advanced ClimateKeeper System. This innovative technology maintains optimal temperatures and humidity levels, preserving food freshness for longer. The system uses electronic controls and multiple sensors to monitor and adjust the interior conditions, ensuring that your culinary ingredients remain at their peak flavor and quality.

Energy efficiency is also a key characteristic of the GE Monogram ZFSB26D SS and ZFSB25D SS. With Energy Star certification, these units not only help you save on utility bills but also contribute to a more sustainable household. They utilize advanced low-energy compressor technologies that are designed to operate quietly while consuming minimal power.

Storage flexibility is a highlight of these models, with adjustable shelving and spacious compartments. The glass shelves are spill-proof, preventing messes from spreading while providing easy organization. The refrigerators also feature a variety of door bins, allowing users to configure storage according to their specific needs.

The integrated LED lighting offers clear illumination throughout the interior, making it easy to find your desired items, even in the darkest corners. Both models come equipped with a sophisticated water filtration system, providing crisp and refreshing drinking water. Ice makers located in the freezer deliver a steady supply of ice, ensuring that you are always well-prepared for gatherings or simple family dinners.

Elegantly designed, the stainless steel exterior adds a modern touch to any kitchen. The sleek finish is resistant to fingerprints, maintaining a pristine appearance. With a seamless design, the ZFSB26D SS and ZFSB25D SS can be built into cabinetry for a custom look.

Whether you choose the ZFSB26D SS or the ZFSB25D SS, you can be assured of superior performance, abundant storage options, and enhanced convenience tailored for a luxury culinary experience. With these refrigerators, GE Monogram continues to set the standard for high-end kitchen appliances.
Top Page Image Contents