Service Kits, Disassembly | Ingersoll-Rand 651418-40-B instruction

OPERATOR’S MANUAL	651418-XX-B
INCLUDING: OPERATION, INSTALLATION & MAINTENANCE	RELEASED: 1-17-79
	REVISED: 12-10-07
MATERIAL FILTER	(REV. E)
MATERIAL FILTER

MAXIMUM INLET PRESSURE 6,000 P.S.I. (414 Bar)

READ THIS MANUAL CAREFULLY BEFORE INSTALLING,

OPERATING OR SERVICING THIS EQUIPMENT.

It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.

THIS MANUAL COVERS THE FOLLOWING MODELS:

MODEL	MATERIAL TYPE	SCREEN MESH SIZE (optional)
651418-40-B	Carbon Steel	93945-40	- 40 mesh
651418-70-B	Carbon Steel	93945-70	- 70 mesh
651418-100-B	Carbon Steel	93945-100	- 100 mesh

SERVICE KITS

yUse only genuine ARO replacement parts to assure compatible pressure rating and longest service life.

yRefer to figure 3 to order replacement parts.

MATERIAL FILTER DATA

Models. . . . . . . . . . . . . . . . . . . . . . . . . . . . see Model Description Chart for “-XXX” (optional screen)

Material. . . . . . . . . . . . . . . . . . . . . . . . . . . see Model Description Chart Maximum Fluid Pressure . . . . . . . . . 6,000 p.s.i.g. (414 bar)

OPERATING AND SAFETY PRECAUTIONS

yRead and heed all warnings, cautions and safety precau- tions before operating this pump.

WARNING HAZARDOUS PRESSURE. Can result in serious injury or property damage. Do not service or clean pump, hoses or dispensing valve while the system is pressurized.

CAUTION Be certain all operators of this equipment have been trained for safe working practices, understand it’s limitations, and wear safety goggles / equipment when re- quired.

WARNING Do not exceed the maximum inlet air pressure as stated on the air motor model plate. Operating pump at higher pressure may cause pump damage.

WARNING HAZARDOUS MATERIALS. Can cause serious in- jury or property damage. Do not attempt to return a pump to the factory or service center that contains hazardous material. Safe handling practices must comply with local and national laws and safety code requirements. Obtain Material Safety Data Sheets on all materials from the sup- plier for proper handling instructions.

GENERAL DESCRIPTION

The ARO model 651418-XX-B material filter is used to separate foreign materials, like dirt, stones and sweeping compound, from the material handling section. Material filters and strainers can be installed in a system to combat this problem, thereby achieving longer service life. Filters and strainers are normally located in one of two places in the pumping system. At this point, where the fluid enters the material handling section, the strainer prevents foreign material from entering the system.

INGERSOLL RAND COMPANY LTD

P.O. BOX 151 y ONE ARO CENTER y BRYAN, OHIO 43506-0151

(800) 276-4658 y FAX (800) 266-7016

CCN 81516684

Figure 1

DISASSEMBLY

1.Unscrew and remove (1) cap from the (8) filter body.

2.Remove (2) gasket from (1) cap.

3.Remove (3) spring and (4) button guide from the (8) filter body.

4.Pull the (6) cartridge and (5) ball from the (8) filter body.

5.Unscrew the (8) filter body from the (7) body and remove (2) gasket.

Replace worn seal and parts with new parts. Reverse disassembly instructions for assembly.

651418-70-B, 651418-40-B, 651418-100-B specifications

The Ingersoll-Rand 651418 series is a collection of high-performance pneumatic tools designed primarily for industrial and professional applications. Comprising models 651418-70-B, 651418-100-B, and 651418-40-B, these tools are designed with precision engineering to deliver exceptional reliability and efficiency for various tasks.

One of the key features of the Ingersoll-Rand 651418 series is its advanced air motor technology, which allows these tools to operate at various pressure settings. This versatility is crucial for working on diverse projects, from light maintenance chores to heavy-duty industrial applications. The air motor is built with high-quality materials to ensure longer service life and increased durability.

Another important characteristic of the Ingersoll-Rand 651418 models is their ergonomic design. The tools are crafted to reduce user fatigue during prolonged use, featuring comfortable grips and lightweight construction. This design principle enhances productivity by allowing workers to maintain optimal control while minimizing strain on their hands and arms.

The models also incorporate innovative noise-reduction features. The design of the air exhaust helps to significantly lower operational noise levels, making them suitable for use in environments where noise control is imperative. This aspect not only protects the hearing of users but also ensures compliance with workplace safety regulations.

Moreover, these tools are equipped with various speed control settings. Users can easily adjust the speed according to the requirements of the task at hand. This flexibility allows for better handling and precision in applications that demand a careful approach, such as assembly or disassembly of delicate components.

Additional characteristics include high torque output, which is vital for tasks such as fastening and bolting. The Ingersoll-Rand 651418 series is capable of delivering consistent power even under challenging conditions. This makes them ideal for technicians and professionals who demand reliability in their tools.

In summary, the Ingersoll-Rand 651418-70-B, 651418-100-B, and 651418-40-B are designed to excel in performance, durability, and user comfort. With features such as advanced air motor technology, ergonomic designs, noise reduction, speed control, and high torque output, these tools are essential for any professional looking to enhance their efficiency and effectiveness in various applications.

OPERATOR’S MANUAL

651418-XX-B

MATERIAL FILTER