Igloo FRW218B operation manual VI. Particular Precautions, VII. Maintenance

Page 7

VI. PARTICULAR PRECAUTIONS

To assure your wine cooler works at the maximum efficiency it was designed for, you should install it in a location where there is proper air circulation, plumbing and electrical connections.

The following are recommended clearances around the wine cooler:

n sides 3/419mm

n top 4

100mm

n back 2

50mm

For proper internal air circulation, do not overfill your wine cooler.

Avoiding direct sunshine temperature, or heated beverages or frozen food in your wine cooler.

Do not place heavy articles on the top of the cellar.

VII. MAINTENANCE

1.Shut off power supply before cleaning cabinet.

2.Take out wines and shelves, and then wash the inner compartment with warm water and neutral detergent.

3.Dry all surfaces thoroughly.

Note: a) Do not use abrasive cleaners!

b)Use mild soapy water to clean the door seal.

c)To ensure efficient operation the back and bottom of the chiller should be cleaned thoroughly.

6

Image 7
Contents Wine Cooler III IndexGeneral Safety Precautions FRW218B II. Technical DataIII. Illustrated Structure IV. Electric Principle DiagramPage VII. Maintenance VI. Particular PrecautionsVIII. Troubleshooting