Halsey Taylor OVL-II ESR-Q, OVL-II SR-Q, OVL-II ER-Q, OVL-II SER-Q Required Tools and Materials

Page 8

OVLERQ*C OVLSRQ*C OVLESRQ*F OVLSERQ*F

REQUIRED TOOLS AND MATERIALS

These tables show special tools and/or additional materials (not provided) which are necessary to complete installation of these units:

5.Install fountain: Remove access cover plate on underside of fountains and SAVE the screws. Mount the fountains to the upper panel and frame with

(4)5/16” x 3/4” (19mm) long bolts and nuts provided. Tighten securely.

Special Tools

Item

Description

Quantity

 

 

 

 

NONE

 

 

 

 

 

Additional Materials

 

 

 

 

Item

Description

Quantity

 

 

 

1

Unplated copper inlet pipe

 

 

 

 

2

Service Stop

 

OVL-II ER-Q/SR-Q/SER-Q/ESR-Q INSTALLATION

1.Assemble and place frame in wall as shown on preceding pages.

2.Install chiller: Remove front panel of chiller. Remove and discard cardboard inner pack from between compressor and side panel. Slide chiller onto the shelf and position it to the left within the guides on the shelf.

NOTE: Building construction must allow for adequate air flow on both sides, top and back of chiller. A minimum of 4” (102mm) on both sides and top is required. See chiller installation for additional instructions.

Figure 12 – Chiller Installation

3.Make water supply connections: Attach an unplated copper water inlet line and a service stop (not provided) to the chiller. Inlet port is marked on the chiller (3/8” O.D. copper tube). Bend the copper tube (provided) at an appropriate length from the chiller to opening in frame. Install a 3/8” O.D. tube tee fitting (provided) on the marked chiller outlet port. Turn on the water supply and flush the line thoroughly.

4.Hang the upper panel on the mounting frame hanger: Align holes in the panel with the holes in the mounting frame. Be sure that panel is engaged with hanger at top of frame before releasing it.

97793C - 10/01

Figure 13 – Upper Panel Installation

Note: With OVL-II SER-Q or OVL-II ESR-Q models, the standard reach fountain must be mounted at the upper position on panel.

Figure 14 – Fountain Installation

6.Remove elbow from end of p-trap and attach it to drain tube. Re-attach elbow to p-trap and cut waste tube to required length using plumbing hardware and trap as a guide.

7.Make connection between remote chiller outlet tube and fountain strainer. Insert the water inlet line into inlet side of strainer by pushing it in until it reaches a positive stop, approximately 3/4” (19mm). Turn on water supply and check for leaks.

8

Image 8
Contents Installer Installation Package Parts List OVL-II SER-Q OVL-II ESR-Q OVL-II SER-Q/OVL-II ESR-Q Rough-In Dimensions OVL-II ER-Q OVL-II SR-Q Model OVL-ER Model OVL-SR Required Tools and Materials Stream Height Troubleshooting & Maintenance Regulator Mounting Bracket For PARTS, Contact Your Local Distributor or Call

OVL-II SER-Q, OVL-II ER-Q, OVL-II SR-Q, OVL-II ESR-Q specifications

Halsey Taylor has long been a name associated with innovative drinking water solutions, and their OVL-II series represents a remarkable step forward in water fountain design and functionality. The OVL-II ESR-Q, OVL-II SR-Q, OVL-II SER-Q, and OVL-II ER-Q models are expertly crafted to meet a variety of needs while prioritizing environmental sustainability and user satisfaction.

One of the main features across this series is their commitment to eco-friendliness. Each model is equipped with a built-in bottle filler, drastically reducing the reliance on single-use plastic bottles. This initiative aligns with growing environmental consciousness and promotes hydration in a sustainable manner. Additionally, the OVL-II models are made with an emphasis on low-maintenance and durability, utilizing stainless steel in construction which not only enhances longevity but also supports hygiene standards.

The OVL-II ESR-Q model features advanced filtration technologies that ensure water quality remains pristine. This model includes an integrated filter system that removes contaminants and improves taste, making it suitable for schools, parks, and public facilities. The filter is easy to replace, staying true to Halsey Taylor’s commitment to convenience.

The OVL-II SR-Q stands out due to its robust design, ideal for high-traffic areas. It features a heavier gauge stainless steel for added strength and resistance against vandalism, making it perfect for outdoor or community spaces where durability is paramount.

For those with additional needs, the OVL-II SER-Q includes accessibility features that make it easier for all users, including children and individuals with disabilities, to access drinking water. This model features a lower height bottle filler and push-button activation that ensures inclusivity.

Lastly, the OVL-II ER-Q model incorporates an electronic sensor for touchless operation. This modern feature promotes hygiene by reducing contact points, making it an excellent choice for hospitals and other healthcare facilities where cleanliness is essential.

In summary, Halsey Taylor’s OVL-II series—comprising the ESR-Q, SR-Q, SER-Q, and ER-Q—blends state-of-the-art water filtration technology, durable design, and user-focused features. These models not only provide easy access to clean drinking water but also emphasize sustainability and hygiene, making them a valuable addition to any environment. With Halsey Taylor, hydration becomes a seamless and eco-friendly experience.