Graco 312348B important safety instructions Old Seal Kits, Instructions - Parts

Page 1

Instructions - Parts

Instructions - Parts

Old Seal Kits

312348B

To replace proportioning pump piston seal sets or cylinder seal sets used on Gusmer and Old Graco H-25 and H-XP2 Hydraulic Proportioners.

Important Safety Instructions

Read all warnings and instructions in proportioning pump manual 311391. Save these instructions.

Piston Seal Kits, see page 2

Cylinder Seal Kits for A-Side Pumps, see page 2

Cylinder Seal Kits for B-Side Pumps, see page 4

Seal Kit Installation, see page 5

Image 1

Contents Important Safety Instructions Seal Kit Installation, see pageOld Seal Kits Instructions - Parts1 Apply Loctite to threads and Piston Seal Kits for A-Side and B-Side Pumpstorque see Table 1 for correct torque measurementNot included in kit Cylinder Seal Kits for A-Side PumpsCylinder Seal Kits for B-Side Pumps Table 1 Torque Specification Piston Kit InstallationFIG. 5 U-Cup Orientation FIG. 6 Piston Head and RodFIG. 9 Tap Seal FIG. 12 Throat Seal Installation ToolFIG. 10 Insert Bushing FIG. 11 Assemble Gasket and Back PlateFIG. 14 Tap Piston Rod Cylinder AssemblySeat Cylinder in Bore TI9108a FIG. 15 Tap Cylinder onto Piston Rod Graco Information Graco Standard WarrantyGraco Headquarters Minneapolis International Offices Belgium, China, Japan, Korea