Keating Of Chicago LB-200 Clean-Up, Melting Solid Shortening, Filter Failure, Warranty Repairs

Page 3

C. CLEAN-UP

FILTER UNIT AND PIPES WILL REMAIN HOT FOLLOWING

FILTRATION. ALLOW THE UNIT TO COOL DOWN BEFORE CLEAN

UP. FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY TO THE

OPERATOR.

 

1.

Turn off filter and disconnect from electrical source.

 

2.

Remove strainer basket and hold down ring for cleaning

Figure 2.1: Drain fryer

3.

Remove and discard filter paper and any residue.

 

4.

Clean filter tub thoroughly.

 

5.

Coat inside of pump with oil if water has been running through it.

 

6.

Place hose so that remaining oil will drain out.

Figure 2.2: Flush out fryer

Figure 2.3: Close drain valve

Figure 2.4: Fill fryer with filtered oil

D. MELTING SOLID SHORTENING

1.Clean filter tub and remove all accessories.

2.Place a cube of shortening in filter tub.

3.Turn fat melter on. (50 lbs takes 1 hr to melt)

4.Once shortening is melted fill fryer with oil by turning on pump and directing end of wand into vessel (See Figure 2.4).

DO NOT ALLOW SHORTENING TO SOLIDIFY IN FILTER AS IT WILL ALSO SOLIDIFY IN PIPES.

DO NOT TURN ON FAT MELTER WITHOUT SHORTENING IN TUB.

E. FILTER FAILURE

If filter will not pump, solidified shortening may have plugged pipes. Turn on fat melter for 20 minutes. This will heat filter tub and pipes to free system of solidified shortening. Reset motor before attempting filtering (reset button is located on rear of pump motor.)

WARRANTY REPAIRS

Keating’s 1 year parts & labor warranty begins with the date of installation. In the event that your filter, under warranty, needs repairs other than routine cleaning, you are requested to contact KEATING OF CHICAGO, INC.

(1-800-KEATING) before calling a local service company. r of pump motor).

HOT FLUID. DO NOT FILL

BEYOND MAXIMUM FILL LINE

LOCATED IN THE FRYER VESSEL.

2

Image 3
Contents Portable Filter OIL is HOT. USE Care When Filtering Preparing the Portable FilterFiltration Filter Failure CLEAN-UPWarranty Repairs Melting Solid ShorteningPreventive Maintenance Problem Probable CauseMelt Cycle Sensor DisassemblyMelt AND/OR Pump Indicator Lights Melt AND/OR Pump ON/OFF SwitchPump and Motor Heater ElementsHeat Tape Ordering Parts Portable Filter Parts ListParts LB200 Model Page Reset Switch Page LB200 1 Way Pump Pump 010567 LB200 2 Way Pump Pump 010567 PC14 Page Keating Limited Warranty Card Service Information

LB-200, LB-65 specifications

Keating Of Chicago has established itself as a leader in the world of commercial laundry equipment, and two of its flagship products, the LB-65 and LB-200, have set the bar high for performance and efficiency. These models are part of Keating’s line of laundry products optimized for both small and large scale operations, making them a popular choice for laundromats, hotels, and other businesses requiring reliable laundry solutions.

The LB-65 is a durable, high-capacity laundry machine designed to handle up to 65 pounds of laundry per cycle. One of its standout features is the advanced microprocessor control system, which allows for precise programming and monitoring of each wash cycle. This technology not only ensures optimal cleaning results but also enhances energy efficiency. With a stainless steel construction, the LB-65 is built to withstand the rigors of heavy use while resisting rust and corrosion, making it an ideal investment for long-term operation.

In contrast, the LB-200 is designed for larger operations, accommodating up to 200 pounds of laundry per load. This model boasts a larger drum size and increased power, making it suitable for high-demand environments. The LB-200 features similar advanced microprocessor controls, but with added programmability for more complex washing needs. The bulk capacity of the LB-200 allows businesses to turn over laundry faster, improving overall productivity and profitability.

Both models are equipped with innovative technology aimed at reducing water and energy consumption. The eco-friendly design underscores Keating's commitment to sustainability, making these machines an excellent choice for businesses looking to minimize their environmental footprint. Furthermore, the LB-65 and LB-200 incorporate advanced safety features, including load sensors and automatic shut-off capabilities, to protect both the machines and users.

In summary, Keating Of Chicago’s LB-65 and LB-200 models are distinguished by their robust construction, advanced control systems, and eco-friendly designs. Whether accommodating lighter loads or heavy-duty tasks, these machines deliver outstanding performance, reliability, and efficiency that can significantly enhance any commercial laundry operation. Investing in these models translates to not just superior cleaning results but also a focus on sustainability and cost-effectiveness in daily operations.