Russound CAM6.6T-S1 Forms Pages, IR Device Codes Pages, Key Functions Pages, Source Names Pages

Page 42

INSTALLER

SYSTEM PROGRAMMING OVERVIEW

This manual includes items that are designed to assist in the programming process.

Forms (Pages 44-46)

Three blank reproducible forms are included as planning tools when determining sources, settings and zone preferences. The Source and Zone Information forms and the Macro Editor form should be completed before programming and referred to during the installation menu process. This speeds up programming time and reduces missed or incorrect entries. These forms also serve as system refer- ence documents if future troubleshooting is needed.

IR Device Codes (Pages 76-78)

This list of command type IR device codes reflects the built-in IR codes in the CAM6.6 library. During programming, these codes will be entered for each source at the “Device Code” prompt. If a code is not listed for a source, the Learn IR procedure is available to learn in and centrally store IR codes.

(Note: Device codes for Phono, DAT and Tape are Learned Only)

Key Functions (Pages 79-100)

This list of key functions identifies what IR codes are supported for each command type (source) by the built-in library. “Learned Only” indicates that this function is not supported and must be learned into the CAM6.6. This list of key functions reflects the different available key functions associated with what you see on the LCD panel when performing the Key Configuration procedure in the Installation Menu. The list of functions corresponds with the command types above (e.g., CD, DSS, etc.).

Source Names (Pages 101-102)

A list of assignable Source Names is provided for advance selection and source form completion before programming.

Flow Charts (Pages 63-75)

Installation Menu flow charts provide a graphical representation of the programming process.

Installation Menu (Pages 48-62)

The Installation Menu provides the step-by-step complete programming procedure for the keypad and the controller.

Although you can begin programming at any point within the Installation Menu, the following sequence is recommended for initial installations, as it progresses from the most basic requirements to the more advanced features.

1. Controller Setup (CTRLR SETUP) (Pages 57-58)

This procedure sets the controller ID number within the system. This number must be manually set when multiple CAM6.6’s are linked through RNET within one system. This procedure is not necessary for systems with only one CAM6.6.

2. Number of Sources (# of Sources/SOURCE SETUP) (Page 56)

This procedure sets the number of sources used in the system. This prevents the user from selecting a source input that is not used.

42

Page 41 Page 43
Image 42
Page 41 Page 43
Contents CAM6.6T-S1 System Important Safeguards Table of Contents Programming Reference SectionUser Section Component GuidesProduct Introduction Main Power and Zone Status Component GuideCAM6.6 Controller-Front Panel 102.5 UNO-S1 KeypadCD Player Optional UNO-S2 KeypadUNO-LRC1 Remote Control Operation Party Party Mode Master or Off User Menu SettingsFeature and Setting UNO-S1 User Menu OperationF1 and F2 Buttons Treble Feature and Setting 1. BassOptional UNO-S2 User Menu Operation BalanceUNO-S1 Keypad Control Internal Source AM/FM TunerUNO-S1 Keypad Control of Tuner Selecting the tunerUNO-S2 Keypad Control UNO-S2 Keypad Control of Tuner MHz FM UNO-S2 Keypad ControlUNO-LRC1 Remote Control UNO-LRC1 Control of Tuner Bank/Memory PresetsMemory Preset Programming Seek UP/DOWN press Seeks next tuned sta- tion up or down Page Sample Configurations Installation MenuSetup Menu Flow Charts System Programming OverviewUnpacking the System Components Tools needed for installationGetting Started CAM6.6T-S1 System ComponentsCAT-5 Wire Color Type Wiring InstructionsKeypad Wiring Speaker WiringCAM6.6 Controller-Rear Panel Installer UNO-S1 Keypad-Update Port SrcUNO-S1 Keypad-CAT-5 Connection CAT-5 ConnectionUNO-S1 KEYPAD-INSTALLATION Keypad LocationUNO-S1 Keypad Port Connection Source IR Connections Source Audio and IR Input ConnectionsSource Audio Connections CAM6.6 with Optional Internal Source AM/FM TunerCommon IR Connection Common IR ConnectionsSpeaker Connections Zone Fixed/Variable Audio Outputs 12VDC Home Theater Trigger In/Out 12VDC Home Theater Trigger12VDC 100mA Trigger Out 12VDC Mute Trigger In/Out 12VDC Mute Trigger12VDC Mute Trigger Out Rnet Link In and Link Out RS-232 Interface Optional Internal Source AM/FM Tuner Antennas AM AntennaFM Antenna Connecting an Alternate Outdoor Antenna for AM/FM Grounding Outdoor Antennas Grounding an Outdoor AntennaInitial Install Test Controller Setup Ctrlr Setup Pages Flow Charts PagesInstallation Menu Pages Number of Sources # of Sources/SOURCE SetupSource Volume Trim Source Setup Basic Setup Source Setup PagesPeripheral Setup Pages 48-50 for Optional Internal Source Numeric IR Source Setup PagesSetup Forms Mute Installer Menu Item ProcedureFeature UNO-S1 Keypad Five-character DisplayMemory # Memory NameBank # All controllers Are you sure? Sure? Please Wait Cycle PowerBank Name EuroVersion Build TimeBuild Date Source NUMDevice Code Command TypeSource Name SUCCESS?Save CHANGES? Selected DefaultAuto PLAY? KEY NameKEY Function MacroIi. Macro ID Trim LevelSelected Unassigned Unasg SRC SEL CMD SrcSC Suffix CMDZone Setup ZonSu Master Enable Syson EnableParty Enable Mute EnableInstallation Menu Power on CMD OnCmdPower OFF CMD OfCmd Learn IR LrnIR KEY Function fMacro ID Command NUMSelected Delay Macro NameDisplays the Software Build Time of the controller #CONTROLLERS#Ctls Displays the Software Build Date of the controllerPeripheral Setup Memory Name, Bank Name Flow Charts MenuSetup Menu Flow Charts Installer Periph Setup Installer Installer Mute Installer Installer LED on rear CAM Panel Blinks fast Installer Installer Device Codes for Cable IR CodesDevice Codes for TVs Device Codes for Video AccDevice Codes for SAT/DSS Device Codes for VCRsDevice Codes for Laser Disc Players Device Codes for Amp and Misc. Audio Device Codes for DVD PlayersDevice Codes for Tuner/Amp Device Codes for CD PlayersKEY Codes TV Hdtv KEY Function UNO-S1 TV HdtvSAP SAP, CC KEY Codes Cable KEY Function UNO-S1 CableSAP KEY Codes Video ACC KEY Function UNO-S1 Video ACCLanguage, MTS KEY Codes SAT/DSS KEY Function UNO-S1 SAT/DSSAlt/Audio,Lang.,CC KEY Codes VCR KEY Function UNO-S1 VCRMenu Back Clear Fav Channel FavCh KEY Codes Laser Disc KEY Function UNO-S1 Laser DiscSubtitle, CC KEY Codes DVD KEY Function UNO-S1 DVDFormat Wide,Zoom,Aspect KEY Codes Receiver KEY Function UNO-S1 ReceiverDVD, LD KEY Codes AMP/MISC Audio KEY Function UNO-S1 AMP/MISC AudioTAPE, MD KEY Codes CD KEY Function UNO-S1Input Tape, MD KEY Codes Home Control KEY Function UNO-S1 Home ControlInput Source/Scene Source Names UNO-S1 UNO-S2Tivo Sample Configurations Multiple Controllers with ONE TunerMultiple Controllers with TWO Tuners Multiple Controllers with Three Tuners ST2 Dual Tuner Back PanelMultiple Controllers with ST2 Dual Tuner ST2 Dual Tuner Back PanelTechnical Specifications Warranty & Repair 109 110 111 28-0111 10/07/04 Copyright 2004 Russound All rights reserved
Related manuals
Manual 112 pages 4.89 Kb

CAM6.6T-S1 specifications

The Russound CAM6.6T-S1 is a sophisticated multi-room audio distribution system designed to meet the high demands of modern audio playback in both residential and commercial settings. This powerful unit can accommodate up to six zones of audio, allowing users to enjoy a personalized listening experience in different rooms simultaneously or independently.

One of the primary features of the CAM6.6T-S1 is its ability to support a wide variety of audio sources. It can connect to traditional speakers, Bluetooth devices, streaming services, and even local networked audio, ensuring that users have access to their favorite music from multiple platforms. The inclusion of a built-in Bluetooth receiver enhances its versatility, allowing for easy pairing with smartphones and tablets for streaming purposes.

The unit operates at a robust power level of 60 watts per channel, which is capable of driving a range of speaker types while maintaining high-quality sound reproduction. In addition to its power, the CAM6.6T-S1 features advanced circuitry and components which provide clean audio signals, reducing distortion and producing a rich, immersive listening experience.

One of the standout technologies of the Russound CAM6.6T-S1 is its intuitive user interface. The system supports a variety of control options, including physical wall-mounted keypads, smartphone apps, and voice control through compatible smart home devices. This flexibility allows users to control their audio environment easily and can be tailored to suit individual preferences.

Moreover, the CAM6.6T-S1 is designed with installers in mind, featuring a streamlined setup process that ensures efficient configuration in both new and existing homes. Its rack-mountable design allows for easy integration into custom audio systems, making it an ideal choice for professional installers.

The system is also equipped with advanced zone management capabilities. This includes the ability to set different audio sources and volume levels for each zone, ensuring that everyone in the household can enjoy their preferred music without disturbing others. Additionally, the feature allows for party modes where all zones can be synchronized, creating an engaging atmosphere for gatherings.

In terms of durability and reliability, the Russound CAM6.6T-S1 is engineered with high-quality materials designed to withstand the demands of daily use. It is ideal for both high-end residential applications and commercial setups, providing a versatile and comprehensive solution for audio distribution.

Overall, the Russound CAM6.6T-S1 is an exceptional multi-room audio solution that embodies advanced technology, high-quality sound, and user-friendly features. Its comprehensive capabilities make it a standout choice for anyone looking to enhance their audio experience in multiple environments.
Top Page Image Contents