Behringer GX110 user manual Rear panel connectors

Page 9

ULTRAROC GX110

7With the MID control you can boost/cut the midrange frequencies.

8The TREBLE control governs the upper frequency range.

+Please note that with all three EQ controls set fully to the left, there will be no signal sent to the speaker, which is due to the classical and extremely efficient EQ circuit used in the ULTRAROC.

9

10

11

Use the EFFECT button to activate/deactivate the selected effect.

The FX MIX control determines the ratio of original vs. effect signal.

The EFFECTS control allows you to select an effects preset from 1 through 99. The selected preset will be loaded approximately 1 sec after releasing the control.

12

The DISPLAY reads either the program number of the selected preset or the value of the parameter selected with the FX MIX control.

+When you start editing a preset, the decimal point in the 2-digit display starts flashing. Press the EFFECT button for a while to overwrite the factory preset and save your own effect setting. To restore the factory presets, simply keep the EFFECT button pressed while you switch on your ULTRAROC.

13

The MASTER control determines the overall and headphones volume level of your ULTRAROC.

sMIDI: You can control your ULTRAROC via MIDI. To select the MIDI receive channel on the ULTRAROC, press and keep the EFFECT and CHANNEL buttons for about 1 sec. Then, use the EFFECTS control to select the MIDI channel of your choice (1 through 16, “On” = Omni; “OF” = Off). Confirm your selection with the EFFECTS button. “OF” means that all MIDI functions are off. While you select the MIDI receive channel, the display flashes. The decimal point in the DISPLAY flashes as soon as MIDI data are being received.

+When the MIDI functions are inactive, one effect can be stored for each of the two channels on your ULTRAROC, which allows, for instance, to select a DELAY effect for the OVERDRIVE channel and assign a REVERB/CHORUS effect to the CLEAN channel. The corresponding program numbers will be stored with the channels and can be recalled using the footswitch or the front panel buttons. When MIDI is on, this assignment feature will be disabled, so that in this mode both channels and effects can be selected separately.

1.3.2 The rear panel

14

Fig. 1.3: The rear panel connectors

Use the POWER switch to put the ULTRAROC into operation.

1. INTRODUCTION

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Ultraroc Safety Instructions Foreword Ultraroc Table of Contents Introduction Before you begin Design conceptVirtube technology Jensen loudspeakerFront panel Control elementsRear panel connectors Ultraroc Standard setup Wiring ExamplesDescription of effects Effects ProcessorUltraroc GX110 Ultraroc GX110 Controlling the Ultraroc via Midi Guitar amp your tone generator Historical Background by Neville Marten Guitarist MagazineInstallation Mains connectionAudio connections Loudspeaker connector Wiring of a mono 1/4 plugMidi connection Appendix Preset listFunction Transmitted Recognized Remarks MIDI-ImplementationSystem Specifications Master Section Specifications§ 1 Warranty CARD/ONLINE Registration Warranty

GX110 specifications

The Behringer GX110 is a powerful and versatile guitar amplifier designed for both practice and performance. This 10-watt combo amp is ideal for guitarists looking for a reliable and portable solution without sacrificing sound quality. One of the standout features of the GX110 is its powerful 10-inch speaker, which delivers a rich and nuanced sound, making it suitable for a wide range of musical styles.

Equipped with a 3-channel design, the GX110 offers three distinct tones: clean, overdrive, and distortion. The clean channel provides pristine sound quality, perfect for crisp, bright notes, while the overdrive and distortion channels enable musicians to explore heavier genres with ease. The amp also features a built-in reverb effect, adding depth and space to your sound, enhancing the overall listening experience.

One of the technological highlights of the GX110 is its integrated digital effects processor. This feature comes packed with multiple presets, allowing guitarists to add modulation, delay, and other effects seamlessly into their playing. The user-friendly interface makes it easy to dial in your desired sound quickly, making it a convenient choice for gigging musicians needing to switch tones on the fly.

In terms of connectivity, the GX110 is well equipped. It features a headphone output for silent practice, making it perfect for late-night jam sessions without disturbing others. Additionally, the aux input allows musicians to connect their external devices, such as smartphones or tablets, enabling easy playback of backing tracks or favorite songs.

The build quality of the GX110 is another significant aspect. It’s designed to withstand the rigors of daily use, with a robust cabinet and durable grill cloth. The compact size of the amp makes it easy to transport, further enhancing its appeal for musicians on the go.

Overall, the Behringer GX110 stands out as a versatile, user-friendly amplifier that delivers quality sound and features. Whether you are a beginner exploring your musical journey or a seasoned player seeking a reliable practice amp, the GX110 delivers the performance and flexibility that every guitarist needs. With its combination of power, portability, and sound versatility, the GX110 is a worthy addition to any musician's gear collection.
Top Page Image Contents