Miele DA220-4 installation instructions Important Safety Instructions

Page 3

IMPORTANT SAFETY INSTRUCTIONS

Read these Operating Instructions carefully before installing or using the Ventilation System.

This appliance is intended for residential use only. Use the appliance only for its intended purpose. The manufacturer cannot be held responsible for damages caused by improper use of the hood.

This appliance complies with current safety requirements. Improper use of the appliance can lead to personal injury and material damage.

READ AND SAVE THESE

INSTRUCTIONS

,CAUTION

For General Ventilation Use Only. Do not use to exhaust hazardous or explosive materials and vapors.

This appliance is designed to vent cooking smoke and odors only.

Be certain your appliance is properly installed and grounded by

a qualified technician.

To guarantee the electrical safety of this appliance, continuity must exist between the appliance and an effective grounding system. It is imperative that this basic safety requirement be met. If there is any doubt, have the electrical system of the house checked by a qualified electrician. The manufacturer cannot be held responsible for damages caused by the lack, or inadequacy, of an effective grounding system.

Before connecting the appliance to the power supply make sure that

the voltage and frequency listed on the data plate correspond with the household electrical supply. This data must correspond to prevent machine damage. If in doubt consult a qualified electrician.

Installation work and repairs should only be performed by a qualified

technician in accordance with all applicable codes and standards. Repairs and other work by unqualified persons could be dangerous and the manufacturer will not be held responsible.

3

Image 3 Contents
Operating and Installation Instructions Ventilation System Contents Important Safety Instructions Use Only if Evacuate and Call the Fire DepartmentTo reduce the risk of fire only use metal ductwork InstallationFunctional description Guide to the appliance On/Off button Fan power level buttons Delayed Shut DownGrease filter button Operation Selecting the power levelIntensive setting Automatically switching back the Intensive power levelFan performance Turning off the fan Automatic Safety Shut OffDimming the lighting Turning the lighting on/offChecking the filter timers Filter timersReprogramming the timers Controls Cleaning and careCleaning the casing Stainless steelGrease filters Cleaning the grease filter Changing the light bulb After Sales Service RepairsMieleCare Installation Instructions Structural support This Appliance Must be Grounded Electrical dataAppliance dimensions Installation Installation accessoriesScrews 8 x 60 mm with Washers Hold the mounting plate up to Installation Screw the mounting plate through Installation Before using the appliance take out Exhaust ducting and connections Air extractionCondensate trap Caring for the environment Disposal of packing materialDisposal of an old appliance Page Page Alteration rights reserved