Miele DA 6290 W installation instructions Plywood backing, To install a plywood backing

Page 30

Plywood backing

The majority of the weight of the installed ventilation system will be supported by the lower retaining plate. It must be firmly attached to the stud framing behind the drywall. If studs are not available in the required locations, a plywood backing (min. ½" (13 mm) thick) spanning at least two studs must be installed. Failure to adequately support the weight as stated may result in the ventilation system falling off the wall, causing personal injury and property damage.

(If plywood backing is not needed, proceed to the included "Installation diagram".)

To install a plywood backing

￿Determine and mark the location of the retaining plate for the canopy as outlined on the "Installation diagram".

￿Make a cutting line 3" (76 mm) above and 3" (76 mm) below the outline of the retaining plate.

￿Find the studs to the left and right of the mounting location by tapping the wall or using a stud finder.

￿Mark a vertical cutting line along the center of each stud.

￿CAUTION

When cutting or drilling into the wall or ceiling, do not damage electrical wiring and other hidden utilities.

￿Remove the drywall between the cutting lines and replace it with plywood of a matching thickness (min. ½" (13 mm) thick). Tape the joints and refinish the wall.

￿Proceed to the enclosed "Installation diagram" to complete the installation.

30

Image 30
Contents En US, CA Contents Important Safety Instructions Use To Reduce the Risk of a Cooktop Grease FireEvacuate and Call the Fire Department Installation Air extraction Recirculation mode Functional descriptionGuide to the Ventilation System Filter button On/Off button Fan power selection Delayed shut downGlass edge lighting Overhead lighting Charcoal filter Color change buttonAutomatically switching back the intensive power level Selecting the power levelIntensive setting OperationFan performance Overhead lighting Delayed Shut Down 5Turning off the fan Dimming the overhead lightingAutomatic Safety Shut-Off Glass edge lightingChanging the color of the glass edge lighting Filter timer Reprogramming the filter timerActivating and reprogramming the Charcoal filter timer Reading the filter operating hours counterSpecial instructions for stainless steel surfaces Cleaning and CareCleaning the casing Special instructions for colored casings RALGrease filter Stainless steel colored controlsGlass edge Cleaning the grease filters Resetting the grease filter timerResetting the charcoal filter timer Active charcoal filterChanging the light bulbs After Sales Service RepairsMieleCare Page Installation Instructions Page Caring for the environment Disposal of packing materialDisposal of an old appliance Appliance dimensions 125 mm Distance between cooktop and hood S Miele Cooktops Non-MieleDrilling diagram To install a plywood backing Plywood backingProtective film InstallationInstallation instructions DismantlingInstallation materials Vent collar Installation instructionsProtective shields Reducing collarAir extraction Condensate trap Electrical connection Grounding InstructionsTechnical data Page Page Alteration rights reserved Nr 851 420

DA 6290 W specifications

The Miele DA 6290 W is a sleek and advanced wall-mounted range hood that combines style and functionality for modern kitchens. Known for its impressive performance and innovative technologies, this model exemplifies Miele's commitment to quality and design.

One of the standout features of the Miele DA 6290 W is its powerful extraction rate. With a maximum airflow of up to 650 m³/h, this range hood effectively removes smoke, steam, and odors from the kitchen, ensuring a fresh cooking environment. It offers multiple power levels, including a booster setting, which provides a temporary increase in extraction power for when things get particularly smoky or steamy in the kitchen.

Miele's DA 6290 W incorporates advanced noise reduction technology, allowing it to operate quietly, which is essential for maintaining a pleasant cooking atmosphere. Its Low Noise feature ensures that even at higher power settings, the sound level remains minimal, preventing distraction during meal preparation.

Another remarkable aspect of this range hood is its intuitive controls. The DA 6290 W features a user-friendly touch control panel, providing easy access to settings and functions. The elegant design of the control panel complements the overall aesthetics of the range hood, making it an attractive centerpiece in any kitchen.

The Miele DA 6290 W also boasts effective lighting solutions, equipped with energy-efficient LED lights that illuminate the cooking surface below. This enhances visibility while cooking and adds a modern touch to the kitchen ambiance. The lighting can be adjusted for brightness, allowing for customized illumination according to preference.

For those who prefer recirculation, the DA 6290 W can also be adapted for this purpose using Miele's filter systems. It comes with an optional recirculation kit, which enables the range hood to effectively purify the air before circulating it back into the kitchen.

In terms of design, the Miele DA 6290 W features a stylish stainless steel construction that seamlessly fits various kitchen décors. Its streamlined appearance not only enhances the kitchen aesthetic but also makes cleaning and maintenance straightforward.

Lastly, Miele’s commitment to durability is evident in the built quality of the DA 6290 W. Designed and engineered with premium materials, it promises longevity, making it a valuable investment for any home chef.

In conclusion, the Miele DA 6290 W is an exemplary range hood that offers exceptional performance, innovative features, and stylish design, making it an ideal companion for enhancing both the functionality and aesthetics of modern kitchens.