Miele DA289-4 Distance between cooktop and hood S, + H + Workspace, Standard unit height H

Page 29

Appliance dimensions

1) and 2)

Cut out area in wall or ceiling for entrance of 6" (150 mm)

ductwork or 5" (125 mm) ductwork with a reducing collar.

Do not install this exhaust hood over cooktops burning solid fuel.

Provided a larger distance is not given by the manufacturer of the cooktop, follow the recommended minimum safety distances between a cooktop and the bottom of the grease filter of 30" (762 mm).

If local building codes require a greater safety distance, follow their requirement.

Follow the safety distances recommended by the cooktop manufacturer in their installation and operating instructions.

If there is more than one appliance beneath the hood and they have different minimum safety distances always select the greater distance.

See "IMPORTANT SAFETY INSTRUCTIONS" for further information.

Distance between cooktop and hood (S)

^To observe the safety distance and

ensure an optimum function and use of the hood, a distance of S = 14 3/8" (365 mm) between the cooktop and the lower edge of the glass pane is recommended.

^If the hood is fitted flush to the ceiling, the sum of

S + H + Workspace

should not exceed the room height.

Standard unit height H

37 7/8" - 51 7/8"

(960 - 1320 mm)

To fit the lower chimney section, the distance between the top of the chimney and the ceiling must be at least 7/8" (20 mm).

29

Image 29
Contents Operating and Installation Instructions Ventilation System Contents Important Safety Instructions Use Only if Evacuate and Call the Fire DepartmentTo reduce the risk of fire only use metal ductwork InstallationFunctional description Guide to the hood Grease filter button On/Off button Fan power selectionDelayed Shut Down Intensive setting Selecting the power levelAutomatically switching back the intensive power level OperationFan performance Turning off the fan Automatic Safety Shut OffDimming the lighting Turning the lighting on/offGrease filter timer Reprogramming the grease filter timer Cleaning the casing Cleaning and careStainless steel Stainless steel colored controlsRemoving the grease filter Grease filter and air intake panelRemoving the air intake panel Cleaning the grease filters Changing the light bulbs Repairs After Sales ServiceMieleCare Http//store.miele.comInstallation Instructions Page Disposal of an old appliance Caring for the environmentDisposal of packing material Installation accessories Large headed screws 5 x 40 mm Installation instruction sheetReducing collar Plywood backing To install a plywood backingGrounding Instructions Electrical dataAppliance dimensions Standard unit height H Distance between cooktop and hood S+ H + Workspace Installation instructions InstallationDismantling Protective filmAir extraction Condensate trap Page Page