Roberts Radio SRCD970 manual Mixed play, Listening to cassette tapes, Recording from the Radio

Mixed play

When mixed play is selected the SRCD970 will play all the tracks on the disc in random order. Press the mix button (10) until the word ‘Mix’ appears in the display. Press the play/pause button (9) to start the disc playing. The SRCD970 will now play all tracks on the disc in random order.

Listening to cassette tapes

Slide the Tape/Radio/CD switch (3) to the "Tape" position. Press the stop/ eject button (19) to open the cassette door (24). Insert a pre-recorded cassette with the tape surface nearest to the cassette keys and the side with the desired recording facing towards you. Close the cassette compartment. Depress the play button (22) and adjust the volume control (4) to suit your personal taste. Use the fast forward (20) or rewind buttons (21) to locate a specific part of the tape. If you wish to temporarily stop the playback depress the pause button (18). When you are ready to resume playback press the pause button a second time. When the end of tape is reached the SRCD970 will automatically switch off.

Recording from the Radio

Slide the Tape/Radio/CD switch (3) to the "Radio" position. Tune in to the desired station. Adjust the volume control (4) to suit your requirements. Insert a blank cassette with the tape surface nearest to the cassette keys. Depress the record button (23) to commence recording. The recording level is set automatically and is not affected by the setting of the volume control. When recording from the MW band a whistle may occur. To remove the whistle slide the beat cut switch (25) on the rear of the SRCD970 to the position giving best reception.