Miele DA 279-4 installation instructions Plywood backing, To install a plywood backing

Page 28

Plywood backing

The majority of the weight of the installed ventilation system will be supported by the lower retaining plate. It must be firmly attached to the stud framing behind the drywall. If studs are not available in the required locations, a plywood backing (min. 1/2" (13 mm) thick) spanning at least two studs must be installed. Failure to adequately support the weight as stated may result in the ventilation system falling off the wall, causing personal injury and property damage.

(If plywood backing is not needed, proceed to the included installation sheet.)

To install a plywood backing

^Determine and mark the location of the retaining plate for the canopy as outlined on the installation sheet.

^Make a cutting line 3" (76 mm) above and 3" (76 mm) below the outline of the retaining plate.

^Find the studs to the left and right of the mounting location by tapping the wall or using a stud finder.

^Mark a vertical cutting line along the center of each stud.

Be careful not to damage any wiring or plumbing that may be located behind the wall. Make sure that the power supply to the area where this installation is being performed has been turned off at the breaker panel before cutting into the wall.

^Remove the drywall between the cutting lines and replace it with

plywood of a matching thickness (min. 1/2" (13 mm) thick). Tape the joints and refinish the wall.

^Proceed to the included installation sheet to complete the installation.

28

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Operating and Installation Instructions Ventilation System Contents Important Safety Instructions Use Evacuate and Call the Fire Department Only ifInstallation To reduce the risk of fire only use metal ductworkFunctional description Recirculation modeAir extraction Guide to the appliance On/Off button Fan power selection Delayed Shut DownIndirect light button Overhead light button Grease filter buttonSelecting the power level Intensive settingAutomatically switching back the Intensive power level OperationFan performance Automatic Safety Shut Off Turning off the fanTurning the lighting on/off Indirect lighting Dimming the lightingFilter timers Checking the filter timersGrease filters Charcoal filterReprogramming the timers Reprogramming the grease filter timerReprogramming the charcoal filter timer Cleaning and Care Cleaning the casingStainless steel Stainless steel colored controlsCleaning the grease filters Grease filtersActive charcoal filter Insert the charcoal filterChanging the light bulb Repairs After Sales ServiceMieleCare Page Installation Instructions Page Disposal of packing material Caring for the environmentDisposal of an old appliance Installation accessories Installation instruction sheet Protective shieldsReducing collar Telescopic retaining plate secures the chimney extensionTo install a plywood backing Plywood backingElectrical data This Appliance Must be GroundedAppliance dimensions Distance between cooktop and hood S Standard unit height HInstallation Installation instructionsProtective film DismantlingAir extraction Condensate trap Page Alteration rights reserved

DA 279-4 specifications

The Miele DA 279-4 is a high-performance range hood designed to provide exceptional ventilation while enhancing the aesthetics of any modern kitchen. This wall-mounted hood blends functionality and style, making it an ideal choice for culinary enthusiasts and design-conscious homeowners alike.

One of the standout features of the Miele DA 279-4 is its powerful extraction capability. With an impressive airflow rate, it efficiently removes smoke, odors, and vapor from the kitchen, ensuring a fresh and clean cooking environment. The hood operates with multiple power levels, allowing users to adjust the extraction intensity according to their cooking needs.

Incorporating advanced technology, the Miele DA 279-4 features a CleanCover stainless steel design, which not only ensures durability but also simplifies cleaning. The smooth surface minimizes residue buildup, making maintenance a breeze. Additionally, the unit is equipped with high-efficiency grease filters that effectively capture grease particles, which can be easily washed in the dishwasher for added convenience.

The Miele DA 279-4 also boasts an innovative lighting system, providing bright illumination over the cooking surface. The integrated LED lights are energy-efficient and create a well-lit workspace, ensuring that cooking tasks are executed with precision.

Another significant aspect of this range hood is its quiet operation. The Miele DA 279-4 features an effective noise-reduction system, allowing for a serene cooking experience without overwhelming noise levels. This is especially beneficial in open-concept kitchens, where the range hood is often visible and audible in shared spaces.

For those who value ease of use, the Miele DA 279-4 includes intuitive controls, enabling quick adjustments to ventilation settings. The model is also designed for seamless integration into existing kitchen decor, with a sleek design that fits well with various styles.

In summary, the Miele DA 279-4 range hood stands out for its powerful extraction performance, efficient grease filtration, energy-saving lighting, and quiet operation. With its user-friendly features and elegant design, it is an excellent addition to modern kitchens, catering to both functionality and aesthetics. Whether hosting dinner parties or preparing family meals, the Miele DA 279-4 ensures an optimal cooking experience while maintaining the cleanliness of the kitchen environment.
Top Page Image Contents