Russound R1250MC user manual Specifications, Thd+N, Warranty

R1250MC AMPLIFIER

SPECIFICATIONS

Single Zone Maximum Output Power: 50W per channel, 2 channels at 8 ohms

(0.1% THD+N; f=1 kHz)80W per channel, 2 channels at 4 ohms 140W at 8 ohms, 2 channels bridged

All Zones Continuous Output Power: 35W per channel, 12 channels at 8 ohms 50W per channel, 12 channels at 4 ohms 100W at 8 ohms, each zone bridged

THD+N:

Signal-to-Noise Ratio:

Frequency Response:

Input Sensitivity:

Input Impedance:

Voltage Gain:

Delay Time:

Input Trigger:

Output Trigger:

Power Requirements:

Power Requirements:

Dimensions:

Weight:

WARRANTY

<0.05% from 20Hz to 20kHz

>100dB

20Hz to 20KHz +/- 0.3dB

70mV for 1W at 8 ohms 500mV for 50W at 8 ohms

47kohms Line Input

32dB

0.5to 4.5 minutes 12VDC 10 kohms 12VDC 100mA

North American Model:

120VAC 60Hz 7A

IEC 320 type connector with 3 terminal detachable power cord. Fuse Rating: T10AL 250V

European Model:

230VAC 50Hz 4A

IEC 320 type connector with 3 terminal detachable power cord. Fuse Rating: T10AL 250V

17" W x 16.5"D x 5.875"H (43 x 42 x 15 cm)

48.9lbs. (22.2kg)

The Russound R1250MC is fully guaranteed for two (2) years from the date of purchase against all defects in materials and work- manship. During this period Russound will replace any defective parts and correct any defect in workmanship without charge for either parts or labor. For this warranty to apply, the unit must be installed and used according to its written instructions. If service is necessary, it must be performed by Russound. The unit must be returned to Russound at the owners expense and with prior written permission. Accidental damage and shipping damage are not considered defects under the terms of the warranty. Russound assumes no responsibility for defects resulting from abuse or servicing performed by an agency or person not specifically author- ized in writing by Russound. Damage to or destruction of components due to improper use voids the warranty. In these cases the repair will be made at the owners expense. To return for repairs, the unit must be shipped to Russound at the owners expense, along with a note explaining the nature of the service required. Be sure to pack in a corrugated container with at least 3 inches of resilient material to protect the unit from damage in transit.

Russound sells products only through authorized Dealers and Distributors to ensure that customers obtain proper support and serv- ice. Any Russound product purchased from an unauthorized dealer or source, including retailers, mail order sellers and online sellers will not be honored or serviced under existing Russound warranty policy. Any sale of products by an unauthorized source or other manner not authorized by Russound shall void the warranty on the applicable product.

7