Fishman LDS9000 manual Follow These Steps to Edit a Program

ProgramFunction

1	To save program, answer YES followed	SAVE PROGRAM?
	by the program number (0-9) of the
		<-	YES	NO ->
	location you wish to save your
				1
2	program.
	If you want the program to
	automatically load as the default
	program when the machine is turned	DEFAULT POWER-ON
	on, answer YES to the default question.
		<-	YES	NO ->
	• Press the foot pedal to dispense the
				2
	first deposit

Follow These Steps to Edit a Program

• Press the BACK key to enter the program manager.

Tip: The BACK key moves through each parameter until you reach the start of the program manager. The NEXT key moves you through each parameter to the bottom of the program manager.

•Press the BACK key as many times as you need to get to the parameter you wish to edit.

•Use the keypad to make your edit followed by the enter key.

•Use the NEXT/BACK keys to make any remaining edits.

•When finished, use the NEXT key as many times as needed to get to the Save menu.

•Save your program edits.

15