Miele G843SCVI, G843VI, G643SCVI manual Cleaning the spray arms, Remove the lower basket

Page 46

Cleaning the spray arms

Sometimes particles of food get stuck in the spray arm jets. The spray arms should be inspected and cleaned every 4 - 6 months.

^Turn off the dishwasher before clean- ing.

Remove the spray arms as follows:

^Remove the cutlery tray (if present).

^Press the top spray arm upwards to engage the inner ratchet and un- screw the spray arm.

^ Remove the lower basket.

^Pull the lower spray arm firmly up- wards to remove.

^Lift up the middle spray arm, a, to

engage the ratchet and unscrew the spray arm, b.

^ Use a pointed object such as a tooth- pick to push food particles into the spray arm jets.

^ Rinse thoroughly under running water.

^ Return the spray arms and check that they rotate freely.

46

Image 46
Contents Operating instructions Incognito SCVi 843 Contents Operation Electrical safety InstallationUse Disposal of an appliance For dishwashers with visible heating elementConsignes DE Sécurité Avertissement Sécurité électriqueConsignes DE Sécurité Mise au rebut de l’appareil UtilisationLave-vaisselle munis d’un élément chauffant visible Caring for the environment Energy saving washingGuide to the dishwasher Wash cabinetControl panel To close the door Before using for the first timeTo open the door Pull the handleWater softener 12 gr/gal Programming the water softenerGr/gal Ppm Button 13 70 gr/gal Checking the programmed water hardnessFilling the salt reservoir Salt indicator Bypassing the salt indicatorRinse aid Adding rinse aidAdjusting the dosage Rinse aid indicatorLoading the dishwasher Do not rinse dishesGlassware Items not recommended for dishwashingSilver and aluminum Cutlery basket Cutlery tray SC units Upper basket Adjusting the upper basketSlide out the upper basket Adjustable cup racks Coffee bar Lower basket Dishwasher with cutlery tray Dishwasher with cutlery basketFoldable spikes Height limitVase / Bottle holder select models Basket accessories Operation Adding detergentWaterproof System Running the dishwasherAt the end of a program Interrupting a program Changing a programProgram When to use Program cycle Program guideFrequently asked questions What if … Possible fault FixProgram, the dishwasher Optic indicator doesShortly after starting a Stops runningTor and the program After a program hasEnded, the optic indica Dicators flash?Dishes are not clean? Pletely removed? Tea or lipstick stainsHave not been com White residue is visibleCutlery? Plastics are discolored?There are rust stains on Detergent dispenserAfter sales service Program update function PCTransport Page User Maintenance Instructions Cleaning the filter in the wash cabinet Triple filter systemPage Cleaning the spray arms Remove the lower basketCleaning the door and door seal Cleaning the wash cabinetCleaning the optic indicator reflector Cleaning the control panel Cleaning the exteriorInstalling an in-line water filter Cleaning the water inlet filterCleaning the filter Cleaning the drain pump and non-return valve Page Alterations rights reserved / G 643 / G 843 Plus