Miele G 818 SCVI operating instructions 15 70 gr/gal, Checking the programmed water hardness

Before using for the first time

15 - 70 gr/gal:

^Press the f button. The f indicator will light.

An indicator corresponding to a preset water hardness will light (see Table 2).

Table 2:

gr/gal	ppm			Button
15 - 16	270 - 280			a
17 - 21	300	-	370	b
22 - 24	390	-	430	c
25 - 31	450	-	560	d
32 - 70	570	- 1260		e

If this value corresponds with the water hardness in your area:

^Turn off the dishwasher.

If you need to program a different water hardness:

^Press the button which corresponds to your water hardness (see Table 2).

The "Salt" and b indicators will flash.

^Press the f button twice.

The "Salt" and f indicators will flash.

The new water hardness is set.

^Turn off the dishwasher.

Checking the programmed water hardness

^Open the door.

^Turn off the dishwasher.

^Press and hold the a and c buttons. At the same time turn on the dishwasher with the "On" (15) button.

^Release all buttons.

The "Salt" and b indicators will flash. If this is not the case, the above steps must be repeated.

^Press the b button.

The b indicator will go out and the "Salt" indicator will flash.

The programmed water hardness is indicated by:

1 - 14 gr/gal

Corresponding indicator is lit, (see Table 1).

^If an indicator is not lit, press the f button.

15 - 70 gr/gal

The f indicator and an additional corresponding indicator is lit (see Table 2).

^Turn off the dishwasher.

16