Miele KM6112, KM6117, KM6118, KM6113, KM6116 Timer, Minute minder, To set the minute minder time

Page 33

Timer

The hob must be switched on to use the timer.

The timer can be used for two different functions:

-to set the minute minder

-to set a cooking zone to switch off automatically.

You can select a time from 1 minute (01) to 91/2 hours (9.^). If a time of more than 99 minutes (99) is set, the time is set in half-hour steps. The half hour is indicated by a dot after the number.

Use the - sensor to reduce the time from 9.^ to 00, and the + sensor to increase the time from 00 to 9.^. The display stops at 2h and at 99. To continue entering the setting, briefly remove your finger from the sensor, and then touch it again.

When the set time has elapsed, 00 will appear in the timer display for a few seconds. An audible tone will sound at the same time for a few seconds. To turn the audible tone off before this, touch the ￿ sensor.

Minute minder

To set the minute minder time

￿Touch the ￿ sensor.

00 and the minute minder indicator lamp will flash in the timer display.

￿Touch the - or + sensor until the time you require appears in the display, e.g. 15 minutes.

The time set will then count down in minutes. The time remaining will be shown in the timer display.

To change the minute minder time

￿Touch the ￿ sensor.

￿Touch the - or + sensor to set the time you want.

To delete the minute minder time

￿Touch the ￿ sensor.

￿Touch the - and + sensors at the same time.

33

Page 32 Page 34
Image 33
Page 32 Page 34
Contents En GB Contents Cleaning and care Models Guide to the applianceKM 6112 / KM 6115 / KM Guide to the appliance Guide to the appliance Control panel Timer display Indicator lampsSensor controls Cooking zone displaysCooking Zone Cooking zonesRating in watts for 230 Cooking KM 6112 / KM 6115 / KM 6116 / KM ZoneGuide to the appliance Correct application Safety with children Technical safety Correct use Page Page Caring for the environment Disposal of the packing materialDisposal of your old appliance Before using for the first time Cleaning for the first timeBefore using for the first time Induction principle InductionNoises Pans Suitable pans includeUnsuitable pans Operation How the hob is operatedException To switch the hob on Switching onSwitching on a cooking zone, setting a power level Altering the power levelStandard Extended SettingsAuto heat-up To activate Auto heat-upTo deactivate Auto heat-up Heat-up time Cooking setting Minutes and seconds approxBooster function To switch on the Booster To switch on the TwinBooster LevelTo switch off the Booster/TwinBooster Useful tips Keeping warm functionSwitching off a cooking zone Switching off and residual heat indicatorsSwitching off the hob Residual heat indicatorsTips on saving energy Minute minder TimerTo set the minute minder time To change the minute minder timeTo switch a cooking zone off automatically To change the automatic switch-off time To use both timer functions at the same timeSafety lock / System lock Safety featuresTo deactivate the locks To activate the locksSafety switch-off Safety switch-off with an over-long cooking timeSafety switch-off if the sensors are covered Induction coils/Cooling elements Overheating protectionInduction coils Cooling elementsControl panel To avoid damaging the surface of your appliance, do not use Cleaning and careCleaning and care Reset To activate the reset functionAdditional functions To set a programme / status setting To call up the programming modeTo save settings To not save settingsAdditional functions Programme Status SettingAdditional functions Problem Possible cause Remedy Hob or cooking Problem solving guideSwitched on Zones cannot beProblem solving guide If you select power Usual way at the power Level set Power level 9 isExtended zones at Same time Hob switches off Function is switchedAll other fault codes Problem Possible cause Remedy Sensors areOver-sensitive or do Not react at allCleaning products Optional accessoriesCeramic and stainless steel hob cleaner 250 ml Saucepans and frying pansSafety instructions for installation Safety distance above the appliance Safety distances to the sides and back of the hob Safety distances underneath the hob Top of an interim shelf is 15 mmInterim shelf Flush-fitted hobs Hob with frame or bevelled edges Seal between the hob and the worktop Hob with frame or bevelled edgesBuilding-in dimensions Building-in dimensions Building-in dimensions Building-in dimensions Building-in dimensions Building-in dimensions Connecting the mains cable to the appliance Installing the hobInstalling the hob Preparing the worktopImportant U.K Electrical connectionWiring diagram After sales service, data plate Alteration rights reserved Nr 798 970

KM6115, KM6116, KM6112, KM6113, KM6118 specifications

The Miele KM6113, KM6115, KM6117, KM6112, and KM6118 are part of Miele's premium induction cooktop lineup, designed to elevate the cooking experience with cutting-edge technology and sleek design. Each model is crafted to deliver precision, efficiency, and convenience, catering to the needs of discerning home cooks.

A highlight of these cooktops is the advanced induction technology, which heats cookware directly while keeping the surface cool to the touch. This feature not only enhances safety but also allows for rapid heating and fine temperature control, making it easier to achieve the desired results for any recipe. The cooktops also boast a variety of cooking zones, accommodating pots and pans of different sizes, and ensuring that multiple dishes can be prepared simultaneously.

The KM6113 is characterized by its four induction cooking zones, allowing flexibility for everyday cooking. Its intuitive touch controls enable users to quickly adjust heat settings, ensuring full command over the cooking process. Additionally, the KM6113 offers a booster function, providing an extra burst of heat for when quick temperature increases are needed.

Moving to the KM6115, this model introduces a five-zone setup, including a powerful zone optimization feature. The heightened flexibility allows for larger cookware, while maintaining energy efficiency. Users will appreciate the programmable timer that can be set for individual zones, providing seamless cooking without the worry of overcooking.

The KM6117 adds even more sophistication with its elegant design and a smart control interface. This model features a seamless installation design that integrates beautifully with kitchen countertops. Furthermore, the KM6117 includes advanced safety features, such as residual heat indicators, ensuring that users are always aware of the cooktop's temperature.

With the KM6112, Miele continues to prioritize ease of use. This model features a unique individual pan recognition system, automatically detecting when a pot is placed on a cooking zone, ensuring optimal energy use. This system complements the cooktop’s quick heat-up time, enhancing efficiency.

Finally, the KM6118 stands out with its combination of performance and modern aesthetics. It features a bridge function, allowing two cooking zones to merge for larger cookware, making it ideal for cooked meals requiring more space. Additionally, the KM6118 is equipped with Wi-Fi connectivity, enabling remote operation through a smartphone app.

In summary, the Miele KM6113, KM6115, KM6117, KM6112, and KM6118 cooktops are not only technologically advanced but also designed for optimal cooking performance and user convenience. These models exemplify Miele's commitment to quality and innovation, making them a perfect addition to any modern kitchen.
Top Page Image Contents