Miele KM5773 installation instructions To activate Stop and Go, To deactivate Stop and Go

Page 32

Safety features

Stop and Go

Your appliance has a Stop and Go feature which, when activated, reduces the power of all cooking zones that have been switched on. This allows you to leave the hob unattended for a short time without any danger of pans boiling over or burning.

To activate Stop and Go:

^Touch the $ sensor until you hear two consecutive beeps.

Be careful not to continue touching the $ sensor for too long, as this will activate the safety lock.

The indicator lamp for the safety lock will start to flash. The power of the cooking zones in use will be reduced to level 1, and a 1 will appear in the corresponding cooking zone displays.

When Stop and Go is activated

-the countdown of a time programmed in for automatic switch-off will be interrupted. When deactivated, the time will continue to run.

-the minute minder will continue without interruption.

-the recording of a Memory programme will be cancelled.

To deactivate Stop and Go:

^Touch the $ sensor until the indicator lamp goes out.

The cooking zones will now run at the level that was previously set.

32

Image 32
Contents GiZ Contents Contents Sensor switches Indicator lamp forGuide to the appliance Hob Control panelCooking zone display Timer/Memory display Cooking zonesCooking Zone Rating in watts for 230Technical safety Correct usage Safety with children Protecting the appliance from damage Protection from burning and scalding Appliance faults Futher safety notes Disposal of your old appliance Caring for the environmentDisposal of the packing material General notes Before using for the first timeCleaning for the first time Manual calibration Calibrating the sensor switchesAutomatic calibration Induction How it worksNoises Pans Suitable pans includeUnsuitable pans Pan sizeSensor switches Switching onTo switch the hob on To switch a cooking zone onSettings LevelsCooking power Minutes Auto heat-upHeat-up time SecondsProceed as follows How to activate Auto heat-upCooking without Auto heat-up Booster function To switch off the hob Switching off and residual heat indicatorsTo switch off a cooking zone Introduction Timer and Memory functionSetting the minute minder Switching a cooking zone off automatically Timer starting valueMemory function Recording a Memory programmeDeleting a Memory programme Using a Memory programmeChecking the steps of a Memory programme Combi mode Safety features Safety lockTo activate the safety lock To deactivate the safety lockTo deactivate Stop and Go Stop and GoTo activate Stop and Go Safety switch-off if the sensors are covered Safety switch-offSafety switch-off with an over-long cooking time Overheating protection Cleaning and care ClothCleaning and care Programming Programme Status Setting Programming An ß appears in the display for a cooking zone Problem solving guideWhat to do if Hob or cooking zones cannot be switched on One of the following has occurred After sales service, data plate Installation Safety instructions for installationSafety distance above the hob Safety distances to the sides of the hob Flush-fitted hobs Hob with frame or bevelled edge Installation above an oven Building-in dimensions Installing the hob Preparing the worktopSealant Electrical connection Important U.KThis Appliance Must be Earthed Wiring diagram Page Page Alteration rights reserved

KM5773 specifications

The Miele KM5773 is a premium induction cooktop that embodies the brand's commitment to quality, innovation, and user-centric design. As one of Miele’s flagship models, the KM5773 combines advanced cooking technologies with a sleek aesthetic, making it a popular choice for both culinary enthusiasts and professional chefs.

One of the standout features of the KM5773 is its induction cooking technology. Induction cooktops use electromagnetic fields to heat pans directly, allowing for precise temperature control and rapid heating. This results in faster cooking times and increased energy efficiency compared to traditional gas or electric burners. With the KM5773, users can enjoy immediate response to temperature adjustments, which provides more control when cooking delicate dishes or searing meats.

The cooktop is equipped with four induction zones of varying sizes, designed to accommodate different pot and pan dimensions. The Flex Zone feature enables users to combine two cooking zones into one larger cooking area, ideal for using oversized cookware or multiple pots simultaneously. This flexibility enhances the user experience and maximizes the versatility of the cooktop.

The KM5773 also includes advanced safety features such as a residual heat indicator, which alerts users when the surface is still hot, and a child lock function that prevents accidental activation. These features not only provide peace of mind but also ensure a safe cooking environment for families.

Another impressive characteristic of the Miele KM5773 is its intuitive touch control interface. The sleek, minimalistic design is complemented by an easy-to-use control panel, allowing for seamless adjustment of settings and timer functions. Users can easily set cooking times, adjust power levels, and switch between different cooking zones with a simple touch.

Additionally, the KM5773 features Miele’s innovative CleanCover design, which ensures that the cooktop remains easy to clean. The smooth glass surface is resistant to scratches and stains, while the absence of protruding elements reduces food buildup, facilitating quick wipe-down after cooking.

In summary, the Miele KM5773 induction cooktop showcases cutting-edge technology, versatile cooking options, and user-friendly features. Its efficient performance, safety attributes, and elegant design make it an excellent addition to any modern kitchen, elevating the cooking experience for everyone from home cooks to culinary professionals. Miele continues to set the standard for quality appliances, and the KM5773 is a testament to their dedication to excellence in cooking technology.