Miele KM5656 installation instructions Setting the timer to turn off a burner automatically

Timer

Setting the timer to turn off a burner automatically

To use this feature a power level must be selected for the desired burner.

^Turn the desired burner on and select a power level.

^Touch the m timer sensor. The display will show 00.

^Touch the m timer sensor again.

An indicator will light in the time display.

^If multiple burners are turned on, press and hold the m timer sensor until the indicator of the desired burner lights, e.g. rear right.

With every touch of the m timer sensor the indicators for the activated burners light up clockwise from front left to front right.

^Press and hold the - or + sensor until the desired time is displayed, e.g. 15 minutes.

The set time counts down in minutes in the time display. The remaining time is displayed and can be changed at any time by pressing - or +. The power level can also be changed at any time.

When the set time has elapsed:

–the burner will automatically turn off,

–the burner display will show 0,

–the timer display will show 00, and

–an audible signal will be heard.

After a few seconds the tone will stop and the 00 will go out.

^To end the signal touch the m sensor.

To toggle between the functions

If the timer is already used with one function and the second function is desired:

^Touch the m sensor.

The timer display will show 00. Follow the steps as previously described.

To monitor the remaining time in the function which is not displayed, touch the m sensor once.

20