Roberts Radio RD-6R manual System reset

Page 17

System reset

If your radio fails to operate correctly, or some digits on the display are missing or incomplete carry out the following procedure.

1.Press and hold in the Info button until the display shows Roberts v2.2

2. Press the Info button twice the display will show System reset.

3. Press in and release the Tuning control to select System reset.

1

2

3

 

4.If DAB was used last then a "Quick scan" of the DAB band will be performed, otherwise a "Quick scan" will be carried out the next time the DAB band is selected.

If a problem persists our technical staff would be pleased to help offer any assistance on operating the radio. Our technical helpline number is 020 8758 0338.

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

16

 

Page 16 Page 18
Image 17
Page 16 Page 18
Contents
RD-6R Contents Controls Front Controls Rear Mains operation Operating your radio DAB Selecting a station DAB Display modes DAB Secondary services DABAutoselect DAB Finding new stations DABSignal strength display DAB Manual Tuning DABUsing your radios Pause Plus feature Pause Plus memory length Pause PlusOperating your radio FM To switch off your radio press the StandBy buttonManual tuning FM FM Stereo/Mono Display modes FMRecalling a preset station DAB and FM Presetting stations DAB and FMSystem reset Display backlight Headphone and optical output socketsRemote control Remote handset battery replacement Using the remote control Clock display General Specifications Circuit FeaturesFuse Mains supplyGuarantee Page Page Roberts Radio Technical Services