Frequently asked questions
Issue | Possible fault | Solution |
Dishes are still | The rinse aid setting may | Increase the dosage, refill the |
wet, glasses and | be too low, or the rinse aid | reservoir or switch the rinse |
cutlery are | reservoir is empty. | aid product when refilling, see |
spotted. |
| "Before using for the first time". |
| Dishes were taken out too | Leave dishes in longer, see |
| soon. | "Use". |
| "2 in 1" products were used. | Use powder detergent and |
| These products have a low | add rinse aid. |
| drying effect. |
|
White residue is | Not enough rinse aid was | Increase the dosage, see |
visible on cutlery | used. | "Before using for the first time". |
and dishes. | Unsuitable "2 in 1" or "3 in 1" | Use a different detergent, |
clouding occurs | products were used. | normal tabs or normal powder |
on glassware and |
| detergent. |
film can be wiped |
|
|
off. |
|
|
36