Miele G 2832 manual Plumbing, Waterproof system, Connection to the water supply

Page 77

Plumbing

Waterproof system

All Miele dishwashers have a safety valve located on the incoming water line and a sealed underside with a water sensor.

If a fault occurs, the water intake is stopped and the drain pump is activated.

Connection to the water supply

￿Do not drink water from the dishwasher!

–The dishwasher can heat its own water to the temperature required by the wash program. This allows for connection of the machine to either a hot or cold water source. For lowest energy consumption connect the dishwasher to a cold water source. For fastest possible wash times, with slightly higher energy consumption, connect the dishwasher to a hot water source. All programs use hot water in the rinse cycles.

–To use the "Energy Saver" program, a hot water connection of minimum 115°F / 45°C and maximum 140°F / 60°C (water intake temperature) is necessary.

The higher the water intake temperature, the better the cleaning and drying results.

–The inlet hose is approximately 5 ft. (1.5m) long.

–A 5 ft. (1.5m) drain extension is available from Miele.

–The water inlet hose comes equipped with a 3/4" female hose thread connector. This can be directly connected to a water supply with 3/4" MHT (male hose thread ends).

–Water pressure: Must be between 4.5 - 145 psi (0.3 - 10 bar).

If the water pressure is lower, the display shows Water intake

see "Frequently asked questions". With high water intake pressure, a reducing valve must be used.

￿To prevent damage to the dishwasher, it must only be connected to a fully vented drainage system.

Do not cut the intake hose. It contains electrical wiring. If the hose is cut, the dishwasher will not work. There will be a water leak and you could be injured. If the hose is too long, coil it neatly and place it behind the machine.

77

Page 76 Page 78
Image 77
Page 76 Page 78
Contents Operating Instructions Dishwasher 2832 Contents Contents Electrical Safety Important Safety InstructionsInstallation Use Disposal of an appliance Save These InstructionsGuide to the dishwasher Control panel Standby indicatorSelection touch controls DisplayDisplay Energy saving washing Caring for the environmentChild Safety Lock Before using for the first timeTo open the door To close the doorClock format Language settingWelcome screen Time of day setting External water softener Water softenerSalt refill message Filling the salt containerAdding rinse aid Rinse aidRinse aid refill message Loading the dishwasher Silver and aluminum Items not recommended for dishwashingGlassware Split cutlery tray Removable spike insert Upper basketRemoving the insert Replacing the insertCoffee bar Adjustable cup racksUniversal support bar Adjusting the upper basket Foldable spikes Lower basketRemovable PlateGuard Plus with StemGuard Vase / Bottle insert Basket accessories Detergent UseAdding detergent Selecting a program Turning onProgram guide Program When to use Program sequenceTo normally soiled UsageTurbo Selecting optionsPre-rinse SoakTime display Starting a programInterrupting a program At the end of a programPreparing your appliance for an extended vacaion Changing a program Additional options Delay startStarting a program before the delay start has elapsed Select the menu option you would like to change SettingsSetting the clock format Indicating the time of day settingLanguage Time of dayTab PowderGel Water hardness Drying PlusFilter check Adjust Sensor WashReorganize program list Save options Unlocking the dishwasher Buzzer in case of a fault TemperatureBuzzer volume BuzzerBrightness Button toneContrast MemoryLeaving the Settings menu Factory defaultTurning the demo mode off DealerRemoteVision Technical faults Frequently asked questionsProblem Possible fault Solution Problems water intake/drain Frequently asked questionsSaver displays Issue Possible fault Solution Program EnergyFault Issue Possible fault Solution Display turns off General problems with the dishwasherDispenser at the end of a Issue Possible fault Solution Detergent is leftProgram Detergent lid cannotSounds Poor cleaning results Glasses and cutlery Issue Possible fault Solution Dishes are not dryAre spotted White residue isDiscolored Film cannot be wiped Off Clouding or etching Issue Possible fault Solution Glasses areOn glasses Glasses are dullComparison Tests Comparison Tests PC Update After sales serviceRepairs MieleCareTransport User Maintenance Instructions Exterior Cleaning and CareWash cabinet Door and the door sealTriple filter system Cleaning the triple filter Cleaning and Care Removing the spray arms Cleaning the spray armsCleaning the filter Cleaning the water inlet filterInstalling an in-line water filter Cleaning the drain pump and non-return valve Page Installation Instructions Grounding Instructions Electrical connectionConnection to the water supply PlumbingWaterproof system Venting the drainage system DrainagePage Alteration rights reserved Nr 724 120 2832

G 2832 specifications

The Miele G 2832 is a highly regarded dishwasher that combines modern technology with Miele's reputation for quality and performance. This model stands out for its comprehensive features that cater to a variety of household needs, making it an excellent choice for efficient dishwashing.

One of the primary highlights of the Miele G 2832 is its impressive energy efficiency. It is designed to minimize water and energy consumption while delivering exceptional cleaning results. The dishwasher comes with an impressive energy rating, ensuring that users can effectively manage their household utilities without sacrificing performance.

The G 2832 is equipped with Miele's renowned 3D cutlery tray, which provides optimal flexibility for arranging flatware and utensils. This innovative feature allows users to adjust the height of the tray, making it easier to accommodate larger items in the lower basket. Additionally, the tray ensures that all cutlery is cleaned thoroughly, eliminating the need to rearrange before the wash cycle.

This model offers multiple wash programs designed to tackle various cleaning conditions. The Intensive program, for instance, is perfect for heavily soiled pots and pans, while the Eco program caters to everyday dishwashing needs with lower water usage. The option to customize wash settings means users can tailor each cycle to their specific requirements, enhancing overall convenience.

Miele's exclusive AutoOpen Drying feature is another significant highlight. This technology allows the dishwasher door to open automatically at the end of the cycle, promoting natural air circulation and ensuring that dishes dry thoroughly without the need for additional energy consumption.

The Miele G 2832 also prides itself on its ease of use. The intuitive control panel provides straightforward navigation through different wash programs and options, ensuring that even users unfamiliar with advanced appliances can operate it effortlessly.

Another distinguishing characteristic of the G 2832 is its build quality. Constructed with high-grade materials, it boasts durability and longevity, reflecting Miele's commitment to craftsmanship. Furthermore, its sleek and modern design allows it to blend seamlessly into any kitchen décor, enhancing the overall aesthetic.

In summary, the Miele G 2832 dishwasher stands out for its energy efficiency, extensive wash programs, innovative drying technology, and user-friendly design. It's a top-tier choice for anyone looking for reliability, performance, and convenience in their dishwashing experience. With Miele’s strong reputation for excellence, the G 2832 is sure to meet and exceed the expectations of discerning users.
Top Page Image Contents