Miele G 5870, G 5875 manual Plumbing, Connection to the water supply

Page 71

Plumbing

Connection to the water supply

￿Installation, repairs and other work by unqualified persons could be dangerous.

￿Do not drink water from the dishwasher!

–The dishwasher can heat its own water to the temperature required by the wash program. This allows for connection of the machine to either a hot (max. 140°F / 60°C) or cold water source.

For lowest energy consumption and for fastest possible wash times connect the dishwasher to a hot water source. All programs use hot water in the rinse cycles.

–To use the "Energy Saver" program, a hot water connection of minimum 115°F / 45°C and maximum 140°F / 60°C (water intake temperature) is necessary.

The higher the water intake temperature, the better the cleaning and drying results.

–The inlet hose is approximately 5 ft. (1.5 m) long.

–The water inlet hose comes equipped with an inlet hose ending with a 3/8" female compression fitting. This can be directly connected to a water supply valve or to an appropriate coupling.

If not connected directly to a water supply valve, an appropriate adapter (not included) is required.

–Water pressure: Must be between 4.5 - 145 psi (0.3 - 10 bar).

–If the water pressure if lower, a "Water Intake" notification will be shown. See "Frequently Asked Questions" for more information.

–If the water pressure is higher than shown, a pressure reducing valve must be used.

Ensure that the water connection is secure after the first use.

￿To prevent damage to the dishwasher, it must only be connected to a fully vented drainage system.

￿Do not cut the intake hose. If the hose is cut, the dishwasher will not work. There will be a water leak. If the hose is too long, coil it neatly and place it behind or under the machine.

71

Page 70 Page 72
Image 71
Page 70 Page 72
Contents Operating Instructions Dishwasher 5870 G Contents Contents Correct usage Electrical SafetyInstallation Use Disposal of an appliance Save These InstructionsGuide to the dishwasher Control panel Energy saving washing Caring for the environmentTo close the door Before using for the first timeTo open the door Display Settings menuWater hardness LanguageFilling the salt container Refill salt message Adding rinse aid Rinse aidRinse aid indicator Loading the dishwasher Silver and aluminum Items not recommended for dishwashingGlassware Typical load for 10 place settings Typical load for 16 place settings Hinged cup rack Upper basketFoldable spikes Universal support bar Jumbo cup rackAdjusting the height Adjusting the upper basket Dishwasher with cutlery tray Heavily soiled items Lower basketGlass rack Removable MultiComfort insertTo remove the insert To replace the insertVase / Bottle insert Universal support bar Foldable spikesSplit cutlery tray CutleryCutlery insert for the cutlery basket Cutlery basketMieleCare Collection Optional accessoriesDetergent UseAdding detergent Starting a program Turning onSelecting a program Usage Program When to use Program sequenceProgram guide Standby Time displayPreparing your appliance for an extended vacation At the end of a programChanging a program Interrupting a programTurbo Additional optionsIntensive lower basket Delay start BrilliantLight Starting a program before the Delay start has elapsedLanguage Settings menuWater hardness Buzzer at the end of a program Buzzer in case of a faultBuzzer volume BuzzerOptimize standby Drying PlusExtended drying Deactivate indicatorsSoak Pre-rinseFilter check Factory defaultLeaving the Settings menu ContrastTechnical faults Frequently Asked QuestionsSounds or the display Problem Possible fault Solution Optical interfaceShows the fault Flashes fast, the buzzerProblems water intake/drain General problems with the dishwasher Detergent lid Problem Possible fault Solution Detergent is leftDispenser at the end A programSounds Poor cleaning results Spotted Problem Possible fault Solution Dishes are not dryGlasses Cutlery areDiscolored film Problem Possible fault Solution Glasses have aBrown or blue Discoloration film Cannot be wiped off Glasses are dullMieleCare After sales servicePC Update RepairsTransport User Maintenance Instructions Door and the door seal Cleaning and CareExterior Wash cabinetIndicator reflector Triple filter system Cleaning the triple filterCleaning and Care Removing the spray arms Cleaning the spray armsCleaning the drain pump and non-return valve Page Installation Instructions Disposal of an old machine Help to protect the environmentDisposal of the packing material Grounding Instructions Electrical connectionGrounding Instructions This Appliance Must be Grounded Hardwired electrical connectionConnection to the water supply PlumbingVenting the drainage system DrainagePage Page Page Alteration rights reserved Nr 053 740 G5870/G5875

G 5870, G 5875 specifications

Miele G 5875 and G 5870 are premier models in Miele’s line of dishwashers, known for their innovative features and exceptional cleaning performance. Both of these models are designed to provide a superior dishwashing experience with a focus on efficiency, flexibility, and technology.

One of the main highlights of the Miele G 5875 and G 5870 is their advanced cleaning technology, which includes Miele’s patented 3D MultiFlex Drawer. This feature provides a versatile and adjustable cutlery tray, allowing users to load utensils and smaller kitchen items more conveniently. The tray can be adjusted in height and width, accommodating various sizes and shapes of cutlery, enhancing the loading capacity of the dishwasher.

Another standout feature of these models is the AutoSensor technology. This intelligent system automatically detects the level of soil in the water, adjusting the wash program accordingly to optimize water and energy usage. This not only promotes eco-friendliness but also ensures that your dishes receive the optimal cleaning intensity.

Miele’s unique DishCare system complements the cleaning performance by utilizing a combination of high-quality wash cycles such as the Eco program, which uses less water and energy, and the Intensive program, designed for tough stains and heavily soiled dishes. Both the G 5875 and G 5870 come with a variety of wash options, including a QuickIntenseWash cycle that delivers powerful cleaning in just 58 minutes, making it ideal for busy households.

In terms of design, these models feature a sleek, modern look with an intuitive user interface, including a digital display that makes selecting programs easy. The interior of the dishwashers is designed with high-end materials, ensuring durability and a premium feel. Noise reduction technology allows for quiet operation, making them suitable for open plan living environments.

Miele has also integrated smart connectivity features into the G 5875 and G 5870, allowing users to control and monitor their dishwashing cycle via the Miele app. This feature enhances convenience, enabling users to start or pause cycles remotely and receive notifications when the cleaning is complete.

With a focus on sustainability, both models are rated highly for energy efficiency, helping to reduce both water consumption and overall environmental impact. The G 5875 and G 5870 stand as excellent choices for consumers seeking a powerful, versatile, and eco-friendly dishwashing solution, together setting new benchmarks in domestic appliance engineering.
Top Page Image Contents