Miele G 2120 manual Frequently asked questions, Technical faults

Page 29

Frequently asked questions

With the aid of the following guide, minor problems can be fixed without a service call.

,Repairs should only be carried out by a qualified and trained person in accordance with local and national safety regulations. Unauthorized repairs could cause personal injury or machine damage.

Technical faults

Issue	Possible fault	Solution
The Start/Stop indicator	The machine is not	Insert the plug.
does not flash after the	plugged in.
dishwasher is turned on	The fuse has tripped.	Reset the circuit breaker.
with s.		Make sure it is a 15 A
		breaker.
The dishwasher stops	The fuse has tripped.	Reset the circuit breaker.
during a program.		Make sure it is a 15 A
		breaker.
The program cycle	There may be a technical	– Turn the dishwasher off
indicators "Rinse",	fault.	s.
"Drying" and "End"		After a few seconds:
flash at the same time.		– Turn the dishwasher
		– Turn the dishwasher
		on.
		– Select the desired
		program with the
		program selector
		button.
		– Press the "Start/Stop"
		button.
		If the problem persists,
		call Technical Service.
The drain pump is	The waterproof system	– Turn off the water
running when the door	has activated.	supply.
is open.		– Call Miele Technical
		Service.

29

Image 29

Contents Operating Instructions Inspira Series 2120 Contents Contents Electrical Safety Important Safety InstructionsInstallation Disposal of an appliance UseGuide to the dishwasher Control panel Energy saving washing Caring for the environmentTo close the door Before using for the first timeTo open the door Child Safety Lock Adding rinse aid Rinse aidAdjusting the dosage Rinse aid indicatorThree times Rinse aid FlashingRhythm Loading the dishwasher Silver and aluminum Items not recommended for dishwashingGlassware Cutlery tray Spoon inserts for the cutlery basket Cutlery basketCoffee bar Upper basketCup racks Slide out the upper basket Adjusting the upper basketLower basket Vase/Bottle holder Basket accessories Detergent UseAdding detergent Selecting a program Turning onStarting a program Program sequence display Usage Program guideChanging a program At the end of a programInterrupting a program Additional functions Factory defaultTechnical faults Frequently asked questionsIssue Possible fault Solution Intake/Drain Problems water intake/drainIndicator flashes Lights alternately Dishwasher stopsGeneral problems with the dishwasher Sounds Poor cleaning results Wet, glasses Issue Possible fault Solution Dishes are stillCutlery are SpottedDiscolored Issue Possible fault Solution Glasses areFilm cannot be wiped Off Glasses are dullPC Update After sales serviceRepairs MieleCareTransport Page User Maintenance Instructions Wash cabinet Cleaning and CareDoor and the door seal ExteriorTriple filter system Cleaning and Care Removing the spray arms Cleaning the spray armsCleaning the filter Cleaning the water inlet filterInstalling an in-line water filter Cleaning the drain pump and non-return valve Page Installation Instructions Disposal of an old machine Help to protect the environmentDisposal of the packing material Grounding Instructions Electrical connectionConnection to the water supply PlumbingVenting the drainage system DrainageAlterations reserved/4906