Miele DWHD651JFP manual Topaz 6-PROGRAM, Custom Door Panels DWHD640JPR, DWHD640JFP / DWHD640JFM

INSTALLATION OPTIONS

CUSTOM DOOR PANELS (DWHD640JPR)

Fully integrated models allow you to have a custom door panel made to match your cabinetry. The custom door can be a two-piece confi guration to look like a drawer at the top and a cabinet door at the bottom or like a single full-length door. A template is included with the fully integrated models to explain the mounting procedure.

NOTE: The door springs that are included with the fully integrated units will provide proper function for custom door panels weighing between 9 and 15 pounds. Custom door panels weighing up to 18 pounds require the use of the tension adjustment screws.

WATER AND ELECTRICAL LOCATIONS

For proper dishwasher operation and appearance, ensure that the enclosure is square and has the dimensions shown. Plumbing and electrical service must enter shaded area.

Make required openings to allow for passage of the water, drain and electrical line. in order to avoid interference with the dishwasher when sliding it into the cabinet, place your openings within the dimensions shown.

NOTE: if the incoming electric supply, water supply and drain connections are all in the same cabinet, the one

4 1/2" x 2 1/2" hole will be large enough for all three to pass through.

The dishwasher electrical supply junction box and dedicated receptacle must be mounted in an accessible cabinet adjacent to the dishwasher (do not mount the junction box or receptacle behind the dishwasher). You

DISHWASHERS

TOPAZ™ 6-PROGRAM

DWHD640JFP / DWHD640JFM / DWHD640JPR

DISHWASHER & CUTOUT DIMENSIONS

DWHD640JFP / DWHD640JFM

			*24-241/4"
	24"	(610-616 mm)					227/16"
							(570 mm)
	(610 mm)							341/16"-367/16"
				239/16"				(865-925 mm)
						(598 mm)	305/16"
	min. 341/16"							(770 mm)	5
							* 23			/8" (600 mm) without
(min. 865 mm)
								decor strips
							33/4"-61/2"
								(95-165 mm)
31/2"			21/16"
			(53 mm)
	(89 mm)		45/8"
					(117 mm)			Measurements in inches and mm

DWHD640JPR

****24-241/4"

**5/8"-7/8"

(16-22 mm)

(610-616 mm)

215/8"

24"

(550 mm)

(610 mm)

341/16"-367/16"

***231/8"-233/8"

(865-925 mm)

(588-594 mm)

*273/4"-301/2"

min. 341/16"

(705-775 mm)

* measured from the bottom

edge of the countertop panel

(min. 865 mm)

** panel weight 9-18 lb (4-8 kg)

35/8"-83/4"

(92-222 mm)

*** 24" (610 mm) wide panel

239/16"

may be used depending

on cabinet design

21/16"

31/2"

(598 mm)

****235/8" (600 mm) without

(53 mm)

(89 mm)

decor strips

315/16"

(100 mm) Measurements in inches and mm

DISHWASHERS

will need a 4 1/4" x 2" (108 x 51 mm) opening through the cabinet in order to pass the junction box through.

The electrical supply can be connected in one of two ways:

–Use the included 3-wire plug and junction box to connect to a dedicated household receptacle.

–Permanently connect to household or fi eld wiring

***231/8"-233/8"
(588-594 mm)	*273/4"-301/2"
	(705-775 mm)

**5/8"-7/8" (16-22 mm)

*measured from the bottom edge of the countertop panel

**thickness recommended 3/4" (20 mm), panel weight 9-18 lb (4-8 kg)

***24" (610 mm) wide panel may be used depending on cabinet design

Measurements in inches and mm

WATER AND ELECTRICAL LOCATION DIMENSIONS

TOPAZ SERIES

REQUIRED OPENINGS:

4 1/4" x 2" (108 x 52 mm) – To pass the included electrical supply junction box through to an adjacent cabinet

4" x 2" (100 x 50 mm) – To pass the included water supply line toward the water supply

11/4" (32 mm) diameter – To pass the dishwasher drain hose toward the drain connection

Electrical and Water Connection

90°	24"	(61cm)
	2"
		)
	(5
	cm		34¼"(86.7cm)
4" (10cm)
			)
			cm
		.6
	-61
	(61
	¼"
	-24
24"

Dedicated

Receptacle or

Field Wiring

Dishwasher

Electrical Supply

Junction Box

Electric cord with

junction box and

three wire plug

are included

with dishwasher

Water
Shut Off	Dishwasher
Valve
	Water Inlet
	Hose

1.800.735.4328 THERMADOR.COM 297