Miele 06 702 810 manual General problems

Page 47

Problem solving guide

General problems

Problem	Possible cause	Remedy
Detergent residue is left	The dispenser was still	Make sure the dispenser
in the dispenser at the	damp when detergent was	is dry before adding
end of a programme.	added.	detergent.
The detergent lid	Clogged detergent	Clean the detergent from
cannot be closed	residue is blocking the	the catch.
properly.	catch.
At the end of a	This is caused by the	The moisture will dissipate
programme there is a	drying system and does	after a short while.
film of moisture on the	not indicate a fault.
inside of the door and
the interior walls.
Water remains in the		Before rectifying the
wash cabinet at the end		problem you must:
of a programme.		– Switch the dishwasher
		off with the On/Off
		button s.
	The filter combination in	Clean the filter
	the wash cabinet is	combination. See
	clogged.	"Cleaning and Care".
	The drain pump or	Clean the drain pump or
	non-return valve may be	the non-return valve. See
	blocked.	"Problem solving".
	The drain hose is kinked.	Remove any kink from the
		drain hose.

47

Image 47

Contents Operating instructions For dishwashers Contents Contents Contents Appliance overview Description of the applianceControl panel Delivery InstallationCorrect usage TransportUse Safety with children Disposal of your old appliance Repairs and maintenanceTo avoid damage to the appliance and other materials Energy saving washing Caring for the environmentDisposal of the packing material To close the door Before using for the first timeTo open the door Child safety lock Water softener To programme the water hardness level To call up the water hardness level in the display Mmol/l 4 d you do not need to add dishwasher salt Before using the appliance for the first time you requireFilling the salt reservoir Salt indicator Adding rinse aid Rinse aidRinse aid indicator Setting the rinse aid dosage Loading the dishwasher Please note Items not suitable for dishwashersWe recommend Hinged cup rack Upper basketDishwasher with cutlery tray Adjusting the upper basketPull out the upper basket Lower basket To refit it b To remove the hinged spike insertTo remove an insert a Cutlery Cutlery insert for the cutlery basket Detergent OperationFor information Adding detergentStarting a programme Switching onSelecting a programme At the end of a programme Programme sequence indicatorsSwitching off DisplayChanging a programme Unloading the dishwasherInterrupting a programme Tab function Additional functionsDelay start How the Delay start time is shown in the display Factory default setting Adjust sensor wash Cleaning the door front Cleaning and careCleaning the wash cabinet Cleaning the door and the door sealCleaning the control panel Cleaning the filters in the wash cabinet Cleaning and care Remove the lower basket Cleaning the spray arms Technical problems Problem solving guideEven when the door is Problem Possible cause Remedy Wash/RinseIndicator lights flash Fault code FXX shows DisplayDishwasher does not fill/drain General problems Rattling noise Problem Possible cause Remedy Knocking noiseNoises Wash cabinetUnsatisfactory washing result Flecked Problem Possible cause Remedy Dishes, cutleryGlasses are Not dry or areDiscoloured film Problem Possible cause Remedy Glassware has aBrown or blue tinge Film cannot be Wiped off Glassware is dullRecommendation Problem solvingCleaning the water inlet filter Cleaning the filterCleaning the drain pump and non-return valve Repairs After sales serviceFor testing institutes Future updates PCIf you would like to … You will need to order … Optional accessoriesTo make the most of your dishwasher Programme When to use Programme chartProgramme sequence Consumption Duration Electrical connection U.K Non-rewireable plugs BSElectrical connection Connection to the water supply PlumbingVenting the drainage system DrainageDishwasher model Technical dataPage Page Alteration rights reserved