Heating milk in the cappuccinatore

Cappuccinatore

Complete Cleaning

^Fill the cappuccinatore to the upper "Max" mark with cold milk, place the lid on, pull the spout out from the lid.

^Turn the valve all the way to the left for heating.

^Place the cappuccinatore under the steam valve.

^Slowly press the steam lever down and carefully "connect" the valve to the cappuccinatore.

Quick cleaning

For a quick cleaning between froths the cappuccinatore lid can be rinsed with the steam valve.

The rinsing does not replace the cleaning of the cappuccinatore in a dishwasher.

^Turn the left jog shuttle on the coffee machine to "Rinse".

^Push the cappuccinatore spout into the "in" position and place an empty cup underneath the cappuccinatore spout.

^Press the steam lever down.

The process will stop automatically when the lid is rinsed.

Thorough cleaning is very important to prevent the cappuccinatore spout from becoming blocked and producing little or no froth. For best results, use a dishwasher - all parts are dishwasher-safe.

^Separate the lid, remove all parts and clean.

^Re-assemble the lid as shown in the illustration. For the valve to work properly, the dot on the valve must face the upper right.

Be sure that the parts are assembled properly.