Miele F1471VI installation instructions Ice/Water Dispenser

Page 23

Ice/Water Dispenser

The ice cube maker can produce approx. 150 ice cubes within 24 hours.

The amount of ice cubes produced depends on the temperature in the freezer section. The lower the temperature, the more ice cubes will be produced in a given period of time.

After the appliance is turned on for the very first time, it can take up to 24 hours for the first ice cubes to drop out of the ice cube maker and collect in the container.

As soon as the drip tray indicator signals that the drip tray is full, the current operation will automatically stop.

Empty out the drip tray using a sponge or dish towel.

If the ice/water dispenser is not used for more than 2 minutes or the freezer door is opened, Standby mode is activated and the lighting for the ice/water dispenser will go out.

Whenever the appliance has been out of service for an extended period of time discard the ice/water production of the first 24 hours after switching on the ice/water dispenser!

23

Image 23
Contents En US, CA Contents Dimensions Electrical safety Important Safety InstructionsInstallation Use Disposal of your old appliance Save These InstructionsGuide to the freezer Control panel for Ice/Water Dispenser Control panel for freezerTurning the appliance On/Off Before using for the first timeBefore use Function Display text SettingsUsing the settings Custom settingsTurning the button sound On/Off Turning off for longer periods of time Door alarm AlarmTemperature alarm Temperature range Setting the temperatureSetting the temperature Temperature unit Fahrenheit/Celsius Placing food in the freezer Using the freezer efficientlyFreezing food Before placing food in the freezerCooling drinks quickly DefrostingSuitable packing material Freezing tipsPacking tips Unsuitable packing material SuperCool Switching on SuperCool Switching off SuperCool SuperCoolTurning on the Ice/Water Dispenser Ice/Water DispenserDispensing crushed ice Dispensing waterIce/Water Dispenser Using the Ice/Water Dispenser for the first time Lighting Safety lockTurning off the Ice/Water dispenser Anti-condensation heater SettingsEntering the settings mode Button sound Exiting the settings modeAnti-clumping Automatic defrost Door shelf Adjusting the interior fittingsMoving the shelves Replacing the freezer basket Freezer basketsCleaning the interior and accessories Cleaning and careBefore cleaning Drip tray Aluminum framesIce cube container Door seals After cleaningVentilation slits Upper lighting Changing the light bulbSide lighting Ice/Water Dispenser lighting Water filter Exchanging the water filter Re-setting the filter indicator Deactivating the water filter Water Treatment Device Certificate Number Filter Performance Data SheetPerformance Data Sheet For Filter Model Frequently asked questions Compressor kicks ApplianceDoor will not OpenFlashing Alarm is ringingAlarm indicator is Lock indicatorProducing any ice Switch onIce maker is not Odor/flavor SmallIce/Water has An unpleasantIce/Water dispenser Producing enough iceOr the ice cubes are MisshapenMieleCare After sales serviceInstallation instructions Disposal of an old appliance Caring for the environmentDisposal of packing materials Installation site InstallationVentilation Installation nicheBase Furniture/fixturesSingle column Installation optionsAppliances attached together using the Merging Kit Custom door panelsFrom 5/8 16 mm to 6 5/16 160 mm Installation with partition using the Merging KitInstallation with partition without using the Merging Kit Side panelsNiche width a 1471 18 457 mm DimensionsNiche dimensions 1471 229 mm Power supply and water connectionDoor dimensions open Dimensions Before you begin Installing the applianceTools needed for installation Optional accessoriesCheck the installation niche Before installation RemoteVision module installation Mounting Accessories Preparing the installation nicheAnti-tip brackets Securing an alternative anti-tip device Sliding the appliance into the installation niche Aligning the appliance Attaching the appliance to the installation niche Installing the appliance Preparing the custom door Installing the appliance Attaching and aligning the custom door front Attaching the covers Attaching the toe-kick cover Aligning the Ice/Water Dispenser Mounting the air separatorInstalling the appliance Attaching the frame and the shelf Plumbing Preparing the water connection Connecting the water supply Electrical connection RemoteVision optional accessory Accessing the RemoteVision control panel Selectable Description of function Options Status indicators Description of functionMasterCool control panel options for RemoteVision