Miele F 1811 Vi F 1901 Vi, F 1801 Vi, F 1911 Vi Ice cube maker, Turning on the ice cube maker

Page 21

Ice cube maker

For the automatic ice cube maker to operate, it must be connected to the household water supply. See "Plumbing".

Turning on the ice cube maker

￿Make sure that the ice cube container is under the ice cube maker, as far as possible.

Ice cubes will not be produced unless the container is completely closed.

￿Touch the sensor button for the ice cube maker so that it turns yellow.

As soon as the freezer has cooled to a freezing temperature, the ice cube container fills with water. Cold air is blown directly over the container.

As soon as the ice cubes are frozen, they fall into the ice cube container.

The ice cube maker can produce approx. 120 ice cubes within 24 hours. Note: Ice production will vary due to your water supply temperature, pressure and hardness.

The production volume of the ice depends on the temperature in the freezer. The lower the temperature the more ice cubes produced.

After the appliance is turned on for the very first time, it can take up to 10 hours for the first ice cubes to drop out of the

ice cube maker and collect in the container.

Once the ice cube container is full, the ice cube maker switches off automatically.

Do not use the ice cube container for rapid cooling of food or drinks. The ice cube maker may become blocked and be damaged.

Do not use the first three containers of ice cubes from the ice cube maker.

Discard the ice produced in the first 24 hours after switching on the ice cube maker.

This applies for the very first use, and whenever the appliance has been out of service for an extended period of time.

The amount of ice cubes produced depends on the temperature in the freezer section. The lower the temperature, the more ice cubes will be produced in a given period of time.

Turning off the ice cube maker

The water supply line must be shut off several hours before the appliance or ice cube maker is switched off.

￿Touch the sensor button for the ice cube maker so that it turns white.

21

Image 21
Contents En US, CA Contents Contents Electrical Safety Important Safety InstructionsUse InstallationImportant Safety Instructions Disposal of your old appliance Save These InstructionsGuide to the freezer Control panel Before using for the first time Before useTurning the appliance On/Off Using the settings SettingsAdditional settings Function Display textTurning the button sound On/Off Turning off for longer periods of time Temperature and door alarm Temperature alarmDoor alarm Setting the temperature Setting the temperatureTemperature range Temperature unit Fahrenheit/Celsius Freezing food Using the freezer efficientlyCooling drinks quickly DefrostingFreezing tips Packing tips Unsuitable packing materialSuitable packing material Switching off SuperCool Switching on SuperCoolSuperCool SuperCoolIce cube maker Turning on the ice cube makerTurning off the ice cube maker Automatic defrost Adjusting the door shelves Adjusting the interior fittingsMoving the shelves Top shelfReplacing the ice cube container Ice cube containerCleaning and care Remove the cleaner promptlyTo better maintain your appliance avoid the following Before cleaning Cleaning the interior and accessoriesAluminum frames After cleaning Ventilation slitsDoor seals Upper lighting Changing the light bulbSide lighting Water filter Water filter change indicatorExchanging the water filter Confirming the filter change Using an external water filterWater Treatment Device Certificate Number Performance Data Sheet For Filter Model Lead free certificate Frequently asked questions Appliance Higher temperatureDoor to Freezer section will notAlarm indicator is Alarm is ringingFlashing Filter display is redIce cube maker is Will not switch onNot producing any ice CubesIce cubes have SmallAn unpleasant Odor/flavorOr the ice cubes are Producing enough iceMisshapen Ice is formingClick Blubb, blubbSssrrrrr CreakingMieleCare After sales servicePage Installation Instructions Caring for the environment Disposal of packing materialsDisposal of an old appliance Installation site InstallationInstallation Base Installation nicheFurniture/fixtures VentilationInstallation options Stainless steel panelsCustom door panels Installation with partition without using the Merging Kit Installation with partition using the Merging KitSide panels From 5/8 16 mm to 6 5/16 160 mmFront panel gap kit optional accessory Door dimensions open Dimensions18X1 19X1Niche width a 18X1 30 762 mm 19X1 36 915 mm Niche dimensions18X1 15 381 mm 19X1 18 458 mm Power supply and water connectionDoor front dimensions Tools needed for installation Installing the applianceOptional accessories Before you beginBefore installation Aligning the housing unit Check the installation nicheRemoteVision module installation Preparing the installation niche Anti-tip brackets Mounting AccessoriesInstalling the appliance Securing an alternative anti-tip device Sliding the appliance into the installation niche Aligning the appliance Attaching the appliance to the installation niche Installing the appliance Preparing the custom door Installing the appliance Attaching and aligning the custom door front Attaching the fixing brackets Attaching the covers Attaching the toe-kick cover Mounting the air separator Plumbing Plumbing Connecting the water supply Electrical connection RemoteVision optional accessory Accessing the RemoteVision control panel Status indicators Description of function MasterCool control panel options for RemoteVisionSelectable Description of function Options Page Page Page Alteration rights reserved Nr 743 750

F 1911 Vi, F 1811 Vi F 1901 Vi, F 1801 Vi specifications

Miele is renowned for its premium household appliances, and the F 1801 Vi, F 1811 Vi, F 1901 Vi, and F 1911 Vi frost-free refrigerators exemplify the brand’s commitment to quality, innovation, and efficiency. Each model combines advanced technology with thoughtful design to deliver exceptional performance and user experience.

The Miele F 1801 Vi is designed for those who value space and functionality. Standing at an optimal height, this model features Miele's renowned PerfectFresh technology, which maintains ideal humidity levels to extend the freshness of food. With a capacity of around 209 liters, it offers ample storage space for both fresh and frozen items. The unit is equipped with an efficient NoFrost system, which prevents ice build-up, eliminating the need for manual defrosting.

Moving to the F 1811 Vi, users experience similar benefits with a few enhancements. The appliance boasts a unique DynaCool feature, which ensures even temperature distribution for optimal food preservation. The additional interior lighting provides better visibility, making it easier to locate items. With a total net capacity of 258 liters, this model strikes an excellent balance between size and functionality for larger households.

The F 1901 Vi takes performance a notch higher with its innovative SoftClose system. This feature ensures that doors close gently, preventing slamming and enhancing durability. The appliance also incorporates a MasterFresh zone for storing perishable items at ideal temperatures. Its robust build quality is evident, ensuring long-lasting performance and reliability.

Finally, the F 1911 Vi brings a sleek, modern approach with advanced touch controls. This model includes a high-resolution display for effortless operation and monitoring. It offers the most advanced cooling technology, including the DynamicCool system for even more consistent temperatures. Designed with energy efficiency in mind, the F 1911 Vi boasts the highest energy ratings, helping households reduce their carbon footprint while saving on electricity bills.

All four models come with Miele’s signature attention to detail, ensuring an aesthetically pleasing appearance that complements any kitchen. With intuitive features, efficient cooling systems, and practical design, the Miele F 1801 Vi, F 1811 Vi, F 1901 Vi, and F 1911 Vi provide not only reliable food preservation but also an elevated cooking experience for the modern home.