Miele F1901VI, F1811VI, F1911VI, F1801VI installation instructions Installation, Use

Page 5

IMPORTANT SAFETY INSTRUCTIONS

Installation

This appliance is top-heavy and must be secured to prevent the possibility of tipping forward.

Keep the door closed until the appliance is completely installed and secured per installation instructions.

~This appliance must be installed and connected in compliance with the installation instructions.

~Installation and repair work should be performed by a Miele authorized service technician. Work by unqualified persons could be dangerous and may void the warranty.

~Installation must comply with local plumbing regulations and state laws.

~Do not operate any appliance with a damaged cord or plug, or if the appliance has been damaged in any manner. Contact Miele’s Technical Ser- vice Department.

~This equipment is not designed for maritime use or for use in mobile installations such as recreational vehicles or aircraft.

~Do not install the freezer in a room with too low an ambient temperature, e.g., a garage, as this may lead to the appliance switching off for longer periods so that it cannot maintain the required temperature.

~In appliances with an automatic ice maker, avoid contact with the moving parts of the ejector mechanism, or with the heating element located on the bottom of the ice maker. Do not place fingers or hands on the automatic ice making mechanism while the freezer is plugged in.

~The ice cube maker is not suitable for connection to a hot water supply.

~Do not use water that is microbiologically or chemically unsafe or of unknown quality without adequate disinfection or other treatment before or after the filter is used; the filter alone is not an adequate safeguard.

Use

~Persons who lack physical, sensory or mental abilities, or experience with the machine should not use it without supervision or instruction by a responsible person.

~To reduce the risk of injury, do not allow children to play in, on or near the appliance, especially in the door hinge area.

~After your freezer is in operation, do not touch the cold surfaces in the freezer compartment, particularly when hands are damp or wet. Skin may adhere to these extremely cold surfaces.

~Do not refreeze frozen foods which have thawed completely.

5

Image 5
Contents En US, CA Contents Contents Electrical Safety Important Safety InstructionsUse InstallationDisposal of your old appliance Save These InstructionsGuide to the freezer Control panel Turning the appliance On/Off Before using for the first timeBefore use Using the settings SettingsCustom settings Function Display textTurning the button sound On/Off Turning off for longer periods of time Door alarm AlarmTemperature alarm Temperature range Setting the temperatureSetting the temperature Temperature unit Fahrenheit/Celsius Freezing food Using the freezer efficientlyCooling drinks quickly DefrostingSuitable packing material Freezing tipsPacking tips Unsuitable packing material Switching off SuperCool Switching on SuperCoolSuperCool SuperCoolTurning off the ice cube maker Ice cube makerTurning on the ice cube maker Automatic defrost Adjusting the door shelves Adjusting the interior fittingsMoving the shelves Freezer basketsReplacing the ice cube container Ice cube containerCleaning the interior and accessories Cleaning and careBefore cleaning Ventilation slits After cleaningDoor seals Aluminum framesUpper lighting Changing the light bulbSide lighting Water filter Exchanging the water filter Re-setting the filter indicator Deactivating the water filter Water Treatment Device Certificate Number Filter Performance Data SheetPerformance Data Sheet For Filter Model Frequently asked questions Door to ApplianceFreezer section will not OpenAlarm indicator is Alarm is ringingFlashing Filter display is redIce cube maker is Will not switch onNot producing any ice CubesIce cubes have SmallAn unpleasant Odor/flavorOr the ice cubes are Producing enough iceMisshapen Ice is formingClick Blubb, blubbSssrrrrr Rattling, vibratingMieleCare After sales servicePage Installation instructions Disposal of an old appliance Caring for the environmentDisposal of packing materials Installation site InstallationBase Installation nicheFurniture/fixtures VentilationAppliances attached together using the Merging Kit Installation optionsCustom door panels Single columnInstallation with partition without using the Merging Kit Installation with partition using the Merging KitSide panels From 5/8 16 mm to 6 5/16 160 mmFront panel gap kit optional accessory Niche width a 18X1 30 762 mm 19X1 36 915 mm DimensionsNiche dimensions 18X1 15 381 mm 19X1 18 458 mm Power supply and water connectionDoor dimensions open Tools needed for installation Installing the applianceOptional accessories Before you beginCheck the installation niche Before installation RemoteVision module installation Mounting Accessories Preparing the installation nicheAnti-tip brackets Securing an alternative anti-tip device Unscrew the plinth Sliding the appliance into the installation nicheAlign the custom door with a level Aligning the applianceAttaching the appliance to the installation niche Open the appliance door Preparing the custom door Installing the appliance Attaching and aligning the custom door front Attaching the lower bracket Attaching the covers Attaching the toe-kick cover Mounting the air separator Plumbing Preparing the water connection Connecting the water supply Electrical connection RemoteVision optional accessory Accessing the RemoteVision control panel Selectable Description of function Options Status indicators Description of functionMasterCool control panel options for RemoteVision

F1911VI, F1801VI, F1901VI, F1811VI specifications

Miele has consistently pushed the boundaries in the appliance industry, especially with its latest range of built-in refrigerators, the F1811VI, F1901VI, F1801VI, and F1911VI. These models epitomize innovation, functionality, and energy efficiency, making them a perfect fit for modern kitchens.

The F1811VI stands out with its advanced cooling technologies and sleek design. It features Miele's PerfectFresh system, which maintains optimal humidity and temperature levels to ensure that food stays fresh for longer. This model has an impressive storage capacity, allowing for ample space to store groceries, while its efficient LED lighting illuminates the interior without generating additional heat.

Similarly, the F1901VI offers enhanced features tailored for serious food enthusiasts. It incorporates Miele’s NoFrost technology, which eliminates the need for manual defrosting. This innovative feature prevents ice buildup, ensuring consistent airflow and optimal cooling performance. Additionally, the F1901VI comes equipped with an intuitive TouchControl interface, providing seamless operation and customization of cooling settings.

The F1801VI is designed with an eco-conscious approach in mind. It boasts energy-efficient cooling, making it one of the most sustainable options in the market. The appliance's SmartFresh technology allows users to store fruits and vegetables in customized conditions, significantly extending their shelf life. With its adjustable shelves and spacious compartments, this model offers flexibility for storing items of varying sizes.

Lastly, the F1911VI combines style and functionality. Its premium finish adds a touch of elegance to any kitchen setup. The refrigerator comes with advanced filtration systems, ensuring that the air inside remains clean and odor-free. The model also features a robust alarm system that notifies users of door openings, ensuring food safety and freshness is prioritized.

All four models share key characteristics, including energy efficiency with high A+++ ratings, practicality through adjustable shelving, and advanced cooling technology ensuring optimal food preservation. Miele continues to uphold its commitment to excellence, making these refrigerators a reliable choice for any household looking to enhance their kitchen experience with top-tier refrigeration technology. With these models, Miele not only meets but exceeds consumer expectations, establishing a benchmark in refrigerator performance and design.