Miele KM 5758, KM 5753 installation instructions Frequently asked questions

Page 36

Frequently asked questions

What if one of the following has occurred?

Possible fault

Solution

 

 

The booster has automatically switched

 

off early.

The overheating protecting feature has

 

been triggered, see "Safety features".

The power level has dropped.

 

 

 

The burner is not working as usual.

 

 

 

What if the cooling fan continues to run after the appliance has been switched off?

This is not a fault. The fan will continue running until the appliance has cooled. It will then switch itself off automatically.

What if an F appears in the display for the rear burners, an E appears in the display for the front burners and numbers appear in the timer display

Possible fault

Solution

 

 

FE99

The overheating protection mechanism

 

has triggered. The burner can be used

 

again as soon as it has cooled down to

 

a safe level.

 

 

Other fault messages

Interrupt the power supply to the

 

cooktop for approx. 1 minute.

 

 

 

If the problem persists after

 

reconnecting the appliance to the

 

power supply, please contact the Miele

 

Technical Service department.

 

 

36

Page 35 Page 37
Image 36
Page 35 Page 37
Contents En US, CA Contents Contents Installation This appliance is intended for residential cooking onlyUse Injury prevention Important Safety Instructions Damage protection Appliance safety Further safety notesGuide to the cooktop CooktopBurner controls and displays Timer control and display Burner dataMin to max Rating in watts Burner Diameter 208 240 Induction How it worksNoises Cookware Suitable pans includeUnsuitable pans Before using for the first time Clean the cooktopHeat the cooktop Use Touch controlsTurning on the cooktop Turning on a burnerSettings Use forPower Heat-up time Auto-heatApprox Min secActivating Auto-heat Booster function Single booster all burners Double booster front left burner onlyResidual heat indicator Turning off a burnerTurning off the cooktop Timer Setting the timerAutomatic switch-off Combi mode Safety features Child Safety LockStop and Go To activate Stop and GoTo deactivate Stop and Go Safety cut-out feature Power level Maximum Operating hoursCooktop is on too long Covered touch controlsOverheating protection Cleaning and Care Saving the settings Not saving the settingsProgramming To set the desired programProgram Status Setting Programming TableProgramming Frequently asked questions Possible fault SolutionWhat if a ß appears in a burner display? Frequently asked questions Technical Service MieleCarePage Installation Instructions Recommended Not recommended Not allowedSafety distances above the appliance Installation Cooktops flush with the countertop Frame/Facet cooktopsInstallation Installation dimensionsVentilation Installing the cooktop Cut outInstallation Electrical connection ConnectionHelp protect our environment Disposal of packing materialsDisposal of an old appliance Page Page Page Alterations rights reserved Nr 766 201
Related manuals
Manual 52 pages 15.44 Kb

KM 5753, KM 5758 specifications

The Miele KM 5753 is a remarkable induction cooktop that combines elegance with superior technology, designed to elevate the culinary experience in any modern kitchen. Known for its sleek design and user-friendly interface, this cooktop stands out as a reliable choice for both amateur cooks and seasoned chefs.

One of the standout features of the Miele KM 5753 is its induction technology. Induction cooking is not only faster than traditional methods but also provides precise temperature control, allowing users to achieve the perfect cooking results. With induction, heat is generated directly in the cookware, ensuring that energy is used efficiently and minimizing heat loss to the surrounding area. This feature is particularly beneficial for maintaining a cooler kitchen environment while cooking.

The KM 5753 boasts multiple cooking zones, each equipped with various power levels to accommodate different cooking needs. The intuitive touch controls enable users to easily select their desired heat setting, while the powerful booster function provides an extra burst of energy for rapid boiling or frying. This flexibility makes it ideal for a range of cooking techniques, from simmering delicate sauces to searing meats perfectly.

Another notable characteristic of the KM 5753 is its SmartSelect feature. This innovative technology allows cooks to select the cooking zone and adjust the power levels with ease. The two-dimensional display clearly indicates the settings, eliminating any guesswork and enhancing the overall cooking experience.

Safety is a crucial consideration in kitchen appliances, and the Miele KM 5753 does not disappoint. It features a range of safety functions, including automatic shut-off, overheating protection, and a child safety lock. These features make it a safe choice, ensuring peace of mind while cooking.

Cleaning the KM 5753 is also a breeze, thanks to its smooth glass ceramic surface. Spills and splatters do not burn onto the cooktop, making it easy to wipe down after use. The cooktop also includes easy-to-clean edge protection, helping to keep the kitchen tidy.

In conclusion, the Miele KM 5753 is a state-of-the-art induction cooktop that embodies the perfect blend of style, performance, and safety. Its advanced features, including induction heating, intuitive controls, and easy maintenance, make it an ideal addition to any kitchen, promising a superior cooking experience for users of all skill levels. The KM 5753 represents Miele's commitment to quality and innovation, setting new standards in culinary capabilities.
Top Page Image Contents