Miele DA 3560 EXT, DA 3590 Exhaust socket, Reducing collar, Non-return valve, Covers, Brackets

Installation

￿1 exhaust socket

for exhaust ducting ￿ 150 mm.

￿1 reducing collar

for exhaust ducting ￿125 mm.

￿1 non-return valve

for fitting into the exhaust socket (not for recirculation mode).

￿2 covers

for the brackets

￿2 brackets

to support the appliance in the wall unit.

￿2 retaining brackets

for additional aligning and securing of the cooker hood in a 900 mm wide unit (DA 3590 only) .

￿1 cover

for the charcoal filter slots.

￿1 spacer strip

to conceal the gap between the rear of the appliance and the wall.

￿Conversion kit for recirculation mode

(this is not supplied, but is available as an optional accessory - see "Technical data").

The kit contains an exhaust grille and flexible aluminium hose with clips.

12 screws 4 x 15 mm

for securing the cooker hood into the wall unit.

4 screws M4 x 16 mm

for securing the cooker hood to the brackets and for securing the spacer strip.

4 screws M4 x 8 mm

for securing the spacer strip.

2 screws 4 x 40 mm,

2 plugs 6 x 36 mm

for additional securing of the cooker hood to the wall (only when fitting the DA 3590 into a 900 mm wide unit).

4 screws 4 x 25 mm

for additionally securing the DA 3590 into a 600 mm wide unit.

4 adhesive covers

to conceal the fixing holes which are not required (DA 3590 only).

1 x T 20 angled key

27