Making Purified Water

BEFORE USING WATER FROM YOUR WATER PURIFIER FOR THE FIRST TIME

continued from page 3

The remaining water will boil and pass through the system as steam to clean all surfaces.

10.The Purifier shuts off automatically when the water has boiled away (no more steam coming out of

spout...takes about 3 hours). After this time, unplug the power cord at the wall outlet.

11. Shake the storage bottle, then discard the 2 or 3

cupfuls of water which may have some harmless carbon fines (very fine black particles) in it from the

filter.

1.Set the Purifier on your countertop or table.

2.Unplug the cover cord from its receptacle (FIG. 1). Holding by the top strap, lift the cover to remove, and set aside.

3.Fill the tank with tap water up to the max. fill line (4 quarts). The purifing cycle is shortened if you USE HOT WATER.

NOTE: You can purify less than the full amount. Use this chart as a guide. DO NOT fill the tank with

more than 4 quarts of water because the storage bottle will overflow.

WHEN		YOU FILL WITH	THE CYCLE TAKES
COLD		WATER TO...	ABOUT...
1 qt.			1	hr., 35 min.
2	qt.		3	hrs., 5 min.
3	qt.		4	hrs., 35	min.
4	qt. (max. fill line)		6	hrs., 5	rain.

4.Put the cover on the Purifier and plug the cover cord into the receptacle.

5.Check to be sure the cover spout containing the carbon filter is locked in place.

6.Set the storage bottle (cap removed) with the opening right under the spout.

7.Plug the power cord into any 120 volt outlet.

8.Press the RESET button. The fan motor in the cover begins to run (check the cover cord plug-in if it does not).

When the cycle is over the Purifier turns off automati- cally. AFTER THE FAN MOTOR GOES OFF, WAIT AT LEAST 30 MINUTES BEFORE REMOVING THE COVER...

WARNING: NEVER REMOVE THE COVER WHILE THE FAN MOTOR IS RUNNING, OR FOR 30 MINUTES AFTER IT STOPS. YOU COULD GET SEVERE BURNS FROM THE BOILING WATER OR STEAM.

9.Unplug the Purifier power cord from the wall outlet.

10.Replace the cap on the storage bottle and store in the refrigerator until you neet it.

11.After the Purifier has cooled (wait for 30 minutes

after the fan motor stops running) remove the cover and clean the tank. BE SURE TO HOLD THE COVER

BY THE TOP STRAP AS YOU REMOVE IT

CARE AND CLEANING OF YOUR WATER PURIFIER

WARNING

ALWAYS BE SURE TO UNPLUG THE PURI- FIER POWER CORD FROM THE WALL OUTLET BEFORE CLEANING, OR BEFORE REPLACING PARTS.

STAINLESS STEEL TANK

INSIDE - After each use, rinse the inside with luke- warm tap water and remove any residue. If a deposit starts to form at the bottom, use Sears Distiller cleaner, Stock No. 42-34543. Follow the instructions on the cleaner bottle. Rub with a soft scouring pad and rinse thoroughly.

CAUTION: DO NOT IMMERSE THE PURIFIER

IN WATER.

OUTSIDE - Wipe the outside of your Purifier with a soft sponge and mild soap.

NOTICE

THERE ARE NO USER SERVICEABLE PARTS

INSIDE. RETURN THE PURIFIER TO AUTHO- RIZED SERVICE PERSONNEL FOR REPAIR (SEE PAGE 6).

CHANGING THE CARBON FILTER

The carbon filters in the cover spout (FIG. 2, page 5), remove odors from the purified water. Replace the

continued, page 5

625.3444 specifications

The Sears 625.3444 is a powerful and versatile tool that has garnered attention for its robust design and practical features. Known primarily as a multi-purpose utility device, the 625.3444 combines functionality with ease of use, making it an ideal choice for both professionals and hobbyists alike.

One of the main features of the Sears 625.3444 is its powerful motor, which drives a range of applications effortlessly. This capacity allows users to tackle various tasks, from light-duty projects around the home to more demanding professional applications. The motor is built with durability in mind, ensuring that it can withstand rigorous use over extended periods.

In terms of technology, the Sears 625.3444 incorporates innovative engineering that enhances its performance. The device is designed for efficiency, reducing energy consumption while maximizing output. This makes it not only an effective tool but also an environmentally friendly option for those conscious about their energy usage.

The ergonomic design of the Sears 625.3444 is another standout characteristic. It features a comfortable grip that minimizes hand fatigue, allowing extended use without discomfort. This is especially valuable for professionals who may need to operate the tool for long hours. The lightweight construction further adds to its usability, making it easy to maneuver in various work environments.

Additional features of the Sears 625.3444 include multiple attachments, which enhance its versatility. Whether it’s drilling, sanding, or cutting, users can easily switch between tasks by changing out the attachments in a matter of seconds. This adaptability saves time and effort, making the 625.3444 a go-to tool for a wide array of projects.

Safety is also a priority with the Sears 625.3444, which incorporates several protective features to ensure user safety during operation. The device includes built-in safety switches and guards that minimize the risk of accidents. These considerations make it suitable for users at all skill levels, from beginners to experienced tradespeople.

In summary, the Sears 625.3444 stands out in the crowded tool market for its powerful motor, energy-efficient technology, ergonomic design, multi-attachment capability, and emphasis on safety. These features combine to create a tool that is not only effective but also convenient and user-friendly, catering to a wide range of needs in both DIY and professional settings. Whether you are looking to complete a simple repair or take on a more complicated project, the Sears 625.3444 is equipped to handle the challenge.