Vulcan-Hart GHF90G, ML-135503, ML-135504, GHF91G General, Introduction, Specifications, Tools

Page 3

GENERAL

INTRODUCTION

Models

This service manual was written for:

GHF91G Gas Fryers and GHF90G Gas Frymates.

INSTALLATION

Generally, installations are made by the dealer or contracted by the dealer or owner. Detailed installation instructions are included in the Installation and Operation Manual, which is sent with each fryer.

OIL FILTERING

Filtering instructions are included in the Installation and Operation Manual.

OPERATION

Detailed operation instructions are included with each fryer in the Installation and Operation Manual.

CLEANING

Detailed cleaning procedures are included in the Installation and Operation Manual.

LIGHTING PILOT

1.Turn thermostat OFF.

2.Push combination valve knob in and turn to OFF.

3.Wait 5 minutes for unburned gas to vent.

4.Push combination valve knob in and turn to

PILOT.

5.While holding the combination valve knob in, light the pilot with a lit taper. Hold the combination valve knob in for approximately 30 seconds before releasing.

NOTE: If pilot does not remain lit, repeat steps 2 through 5, but allow a longer period of time before releasing the combination valve knob. Adjust pilot flame, if necessary, as outlined under Pilot Adjustment in Service Procedures and Adjustments.

6. Turn combination valve knob to ON.

SPECIFICATIONS

Gas Data

MODEL

No. Tubes

BTU/HR

GHF91G

4

120,000

GHF90G

0

0

 

 

 

TOOLS

Standard

Hand tools (standard set)

VOM with AC current tester (any quality VOM with a sensitivity of at least 20,000 ohms per volt can be used)

Gas test kit

Temperature tester (thermocouple type)

Manometer

– 3 –

Image 3
Contents GHF Series Heavy Duty Range Matching GAS Fryers & Frymates Table of Contents Tools SpecificationsGeneral IntroductionDoor Removal and Replacement of PartsCovers and Panels BurnersThermostat Thermopile High LimitCombination Valve Pilot OrificeFRY Tank Calibration Steps Service Procedures and AdjustmentsMillivolt Controls Test Thermostat CalibrationNozzles and Orifices Pilot AdjustmentBURNERS, Nozzles and Orifices BurnersCombination Valve Regulator Adjustment System Condition Quick Check Procedures Electrical OperationControl System Description Schematic Component Function Symptom Possible Cause TroubleshootingTroubleshooting Form 35618

GHF90G, GHF91G, ML-135504, ML-135503 specifications

The Vulcan-Hart ML-135503, ML-135504, GHF91G, and GHF90G are renowned appliances designed to cater to the rigorous demands of commercial kitchens. These models are celebrated for their reliability, efficiency, and advanced features that enhance cooking performance.

The ML-135503 and ML-135504 models are equipped with powerful gas cooking capabilities. They feature heavy-duty cast iron grates that provide durability and excellent heat retention. The adjustable burners allow chefs to control the flame intensity with precision, ensuring that every dish is cooked to perfection. The ergonomic design of the controls enhances user experience, allowing for easy operation even in fast-paced kitchen environments. Another notable feature is the built-in drip trays that simplify cleanup, making these models not only functional but user-friendly.

On the other hand, the GHF91G and GHF90G series serve as ideal solutions for high-volume cooking requirements. These units are engineered with advanced technologies that ensure even heat distribution, allowing for consistent cooking results. The GHF series boasts a robust construction, designed to withstand the rigors of daily use in busy kitchens. Equipped with features such as adjustable thermostats and turbo broil burners, these models facilitate precise temperature control, which is critical for various cooking techniques.

In terms of energy efficiency, Vulcan-Hart has integrated features into the GHF91G and GHF90G to reduce gas consumption while maintaining high performance. This not only contributes to lower operational costs but also aligns with sustainable practices in the food service industry. Furthermore, both series prioritize safety, featuring pilot lights and flame failure devices that enhance operational security.

Overall, the Vulcan-Hart ML-135503, ML-135504, GHF91G, and GHF90G models stand out in the commercial kitchen equipment market due to their exceptional build quality, advanced technologies, and user-oriented features. Chefs and restaurateurs can rely on these appliances to deliver consistent performance, making them invaluable assets in any culinary establishment. Whether it’s grilling, frying, or simmering, these models exemplify Vulcan-Hart's commitment to innovation and excellence in kitchen solutions.