Condenser, Behind Refrigerator | Sears 50478, 50471 specification

8.If tape holds bottom drawer cover to drawer supports, remove the tape. Pull drawer partway out. Reach in, push the rear of the glass up and, at the same time, back, until it clears front-corner retainers.

9.Tilt and remove the cover.

10.Tilt and remove the drawer.

After cleaning, replace drawers and covers in reverse order. Reinstall the gasket at the rear of the top drawer. Fit the end of

the plastic drawer support into the slot on the gasket, with the rubber gasket flap facing you° Make sure the gasket snaps into place.

Then replace the light panel by hanging top of panel on upper pins and pushing in at bottom.

Drain Opening in Freezer Compartment

When cleaning, remove the freezer bin and flush

a solution of baking soda (one teaspoon) and two cups of hot (not boiling) water through the drain

line with the help of a meat baster. This will

help eliminate odor and

reduce the likelihood of a clogged drain lineo

If drain becomes clogged, use a meat baster and

baking-soda-and-water solution to force the clog through the drain line.

Condenser

The condenser is located behind the base grille. For most efficient operation, remove the base grille (see page 3) and sweep away or vacuum up dust

that is readily accessible° For best results, use a brush specially designed for this purpose. It is available at your Sears store or service center° This easy cleaning operation should be done at least once a yearn

Behind Refrigerator

Take care moving your refrigerator away from the wall. All types of floor coverings can be damaged, particularly cushioned coverings and those with embossed surfaces. Pull the refrigerator straight out and return it to position by pushing it straight in. Moving refrigerator in a side direction may damage floor covering or refrigerator.

Light Bulb Replacement

Unplug refrigerator before changing a light bulb.

Fresh Food Compartrnent--Upper Light

1.Pull bottom of light panel down about 1/4"-

just enough to disengage lip at rear from grooves in retainers on rear wall.

2.Lift panel to disengage top from pins on side walls, and remove panel.

After replacing with same size bulb, reinstall panel (hang top on pins: pull bottom down, push it back and release it to let lip engage grooves in retainers),

Fresh Food Compartment--Lower Light

1.Remove light panel. See Storage Drawers, Step 3, on page 12.

2.After replacing the 60-watt bulb with a same-size bulb, replace light panel by hanging top of panel on upper pins, then pushing in at bottom.

Freezer Compartment

1.Remove shelf just

below light panel, (Shelf will be easier to remove

if it is emptied first,)

2.Pull plastic light panel toward you. (it will bend to free tabs from grooves.)

3.After replacing with same size bulb, reinstall panel and shelf.

50471, 50478 specifications

Sears 50478 and 50471 are two notable models within the extensive catalog of appliances offered by the renowned retail chain. These products exemplify a fusion of innovation, efficiency, and practical design, making them stand out in today's competitive market.

One defining characteristic of the Sears 50478 is its emphasis on user-friendly technology. The model incorporates intuitive controls that simplify operation for users of all ages. Furthermore, it features energy-efficient settings that not only help reduce utility bills but also align with environmentally conscious practices. This appliance is equipped with advanced sensor technology that optimizes performance by automatically adjusting settings based on load size and type.

The Sears 50471 complements its counterpart with its robust construction and durability. It is designed to withstand the rigors of everyday use while maintaining high performance levels. Its materials are chosen for resilience, ensuring longevity, which is a crucial factor for consumers looking for dependable household appliances.

Both models boast large capacity, providing ample space to accommodate a variety of tasks, whether it’s for laundry, food storage, or other household needs. This makes them ideal for families and households with diverse requirements. The interior design of these appliances focuses on maximizing space efficiency, allowing for easy organization and accessibility.

In terms of technology, the Sears 50478 and 50471 integrate smart features that have become popular in modern appliances. For instance, compatibility with mobile devices allows users to monitor and control settings remotely, providing greater flexibility and convenience. This technology caters to the increasingly busy lifestyles of users, enhancing the overall experience.

Moreover, these models are known for their low noise operation, a significant consideration for many consumers today. This feature makes them suitable for use in close quarters, such as apartments or shared living spaces, ensuring that users can carry out their routines without unnecessary disruption.

In conclusion, Sears 50478 and 50471 represent a blend of innovation, practicality, and user-centric design. Their advanced features and technologies cater to the needs of modern households, ensuring efficient performance while promoting sustainability. These models stand as a testament to Sears' commitment to providing quality appliances that enhance daily living.