Sears 790.428 manual Before Using the Cooktop Setting Cooktop Controls, Using the Touch Control

Page 9

Before Using the Cooktop

Prior to using your cooktop for the first time, apply the recommended cooktop cleaning creme (on the web visit www.sears.com for replacement cleaner, item number 40079) to the ceramic surface. Buff with a non-abrasive cloth or pad. This will make cleaning easier when soiled from cooking. The special cooktop cleaning cream leaves a protective finish on the glass to help prevent scratches and abrasions.

Setting Cooktop Controls

Fig. 22

Using the Touch Control

The recommended way to use the touch pads on the cooktop is shown in Fig. 22. Be sure that your finger is placed in the center of the touch pad as shown. If the finger is not placed on the center of a pad, the cooktop may not respond to the selection made.

Lightly contact the pad with the flat part of your entire fingertip. Do not just use the narrow end of your fingertip.

Operating the Cooking Zones

The Induction cooktop has four Cooking Zones designed for cookware of various sizes. Be sure to place cookware that meets the minimum and maximum pan size requirements (Fig. 19) for the Cooking Zone desired and is best for the amount of food being prepared. Place the cookware with the prepared food on the Cooking Zone BEFORE setting any of the Cooktop controls.

To Turn ON one or more of the Cooking Zones:

1.Place the prepared food using the correct type and size cookware on the desired Cooking Zone. Be sure to center the cookware on Cooking Zone completely covering the minimum ring marked on the Zone surface. PLEASE NOTE: If the cookware requirements for the Cooking Zone (See Fig. 20) are not met the sensors will detect a problem and display the letter F in the affected Cooking Zone LED. Any problems must be corrected before proceeding.

2.Touch and hold the key pad for 2 seconds (or until a beep sounds). The Power Indicator light located above the

key pad will turn ON. NOTE: If no other key pad is touched within 10 seconds the request to Power ON the cooktop will clear.

3.To start one or more of the four Cooking Zones lightly touch the key pad for the Cooking Zones needed. A beep will sound and the chosen Cooking Zone power level digital display will show 0 indicating no power level for the Zone

has been set yet. NOTE: If no other key pad is touched within 5 seconds the request to Power ON the Cooktop Zone will clear.

4.Set the desired power level for the Cooking Zone by touching either the or key pad. If the key pad is touched the Cooking Zone will start at a “Power Boost” maximum power level (the Cooking Zone LED will display P

and the control will beep once). If the key pad is touched once the Cooking Zone will start at 1.0 (the Cooking Zone LED will display 1 and the control will beep once).

NOTE: Touch once, or repeatedly touch the or key pads to adjust or scroll through power levels at any

time during the cooking process (To scroll through the power levels quickly touch and hold the or key pads until the power level desired is reached). Once the Cooking Zone power level has been set the food will begin to heat at that level until the power level is manually changed. For more information about the available Cooktop Zones power levels available see “Power Level Settings” section on page 6.

ENGLISH

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Induction Cooktop Table of Contents Important Safety Instructions Important Instructions for Using Your Induction Cooktop Induction Cooktop FeaturesInduction Cooktop Features Induction Cooktop Display Messages LED Messages or Light Indicators Displayed by Main ControlMinimum Pan Size Requirements for each Cooking Zone Before Using the CooktopDo not let pans boil dry. This may cause Also remember toCookware or Pans directly with Cooktop surface. If the cookware does not meet any of theseUsing the Touch Control Before Using the Cooktop Setting Cooktop ControlsOperating the Cooking Zones To Turn on one or more of the Cooking ZonesTo Turn the Keep Warm Feature on Keep Warm FeaturePreheat Recommendations To Turn on one or more of the Cooking Zones cont’dLocking the Controls Minute TimerOperational Noises Power SharingGeneral Care & Cleaning Cleaning Recommendations for Ceramic Glass CooktopDo not use the following on the ceramic cooktop See Fig Before You Call Cooktop Zone Control displays E Cleaning section2 digit LED Main Control Displays 00, 03, 04, 05, 06 orPage En los EE.UU U.S.A

790.428 specifications

The Sears 790.428 is a highly regarded product in the realm of household appliances, particularly known for its versatile microwave oven capabilities. A key feature of this model is its compact yet efficient design, making it suitable for various kitchen sizes, especially where space is at a premium. The aesthetic appeal of the Sears 790.428 brings a modern touch to any kitchen décor, thanks to its sleek finish and user-friendly controls.

One of the primary attributes of the Sears 790.428 is its powerful cooking capabilities. With a robust wattage, this microwave ensures fast and even cooking, greatly reducing the time it takes to prepare meals. The appliance is equipped with multiple power levels, enabling users to customize cooking according to specific food requirements. This feature allows everything from reheating leftovers to preparing entire meals, enhancing the microwave's versatility in everyday cooking.

The Sears 790.428 also boasts several pre-programmed cooking options, which simplify meal preparation. These settings take the guesswork out of cooking times and temperatures, making it easier for users to achieve optimal results without needing extensive culinary knowledge. With specific modes for defrosting, popcorn, and baking, the model caters to a variety of cooking needs.

Another noteworthy technology featured in the Sears 790.428 is its turntable mechanism, which ensures that food is cooked evenly. The turntable rotates during the cooking process, promoting uniform heating and preventing cold spots that can occur with traditional microwave cooking. This innovation contributes to the appliance’s overall performance, allowing users to enjoy better and more consistent meals.

In addition to its cooking features, safety is paramount in the design of the Sears 790.428. The unit is equipped with a child lock function, preventing accidental operation by little hands, making it an excellent choice for families. Moreover, the intuitive interface and clear display allow for easy operation, ensuring that anyone can effortlessly use the microwave.

Durability is also a key characteristic of the Sears 790.428. Built from robust materials, the appliance is designed to withstand everyday use while providing reliable performance. This longevity contributes to the overall value of the product, as it is an investment that can serve households for many years.

In conclusion, the Sears 790.428 blends functionality, safety, and innovative cooking technology, making it an invaluable addition to any kitchen. Its powerful features and user-friendly design establish it as a preferred choice for those seeking a dependable and efficient microwave oven.
Top Page Image Contents