Before you begin | Behringer KX1200 instruction

KEYBOARD AMP/PA SYSTEM KX1200

1.1 Before you begin

Your KX1200 was carefully packed in the factory and the packaging is designed to protect the unit from rough handling. Nevertheless, we recommend that you carefully examine the packaging and its contents for any signs of physical damage, which may have occurred during transit.

+If the unit is damaged, please do not return it to BEHRINGER, but notify your dealer and the shipping company immediately, otherwise claims for damage or replacement may not be granted. Shipping claims must be made by the consignee.

Be sure that there is enough air space around the unit for cooling and please do not place the KX1200 on high-temperature devices such as power amps or radiators, etc. to avoid overheating.

+Before you connect the KX1200 to the mains, please make sure that your local voltage matches the voltage required by the unit:

The fuse holder on the female mains connector has 3 triangular markings, with two of these triangles opposing each other. The KX1200 is set to the operating voltage printed next to these markers and can be set to another voltage by turning the fuse holder by 180°. CAUTION: This instruction does not apply to export models exclusively designed, e.g. for 115-V operation!

Please use the enclosed power cord to connect the unit to the mains. The cord complies with all applicable safety standards.

+Please note that all units must be grounded properly. For your own safety, you should never remove any ground connectors from electrical devices or power cords or render them inoperative.

+Please note that extreme output volumes can lead to permanent hearing damage. Turn down the VOLUME control before you switch on the unit. Be sure to use appropriate volume levels.

1.2 Control elements

1.2.1 Front panel

Your BEHRINGER KX1200 has four identical channels, and each of these channels has two controls. Since all channels are identical, the following descriptions refer to one of them only.

Fig. 1.1: KX1200 front panel

Use the VOLUME control to adjust the channel volume.

The FX/MON control determines the channel’s effect intensity or monitor volume.

+Basically, the VOLUME controls of channels 1 through 4 work like a “gain” control, i.e. you can use these channels to connect any type of conventional keyboard or string instrument, and adapt the input sensitivity with the VOLUME controls.

The BASS control allows you to boost/cut the bass frequencies. The LOW MID control governs the low midrange frequencies.

Use the HIGH MID control to adjust the upper midrange frequencies.

6	1. INTRODUCTION

KX1200 specifications

The Behringer KX1200 is a versatile and powerful keyboard amplifier designed for both home use and live performances. With its impressive design and advanced features, it caters to musicians who seek enhanced sound quality and flexibility in their performances. This amplifier exemplifies Behringer's commitment to providing high-performance audio solutions at an accessible price.

At the heart of the KX1200 is its robust power output, which delivers a crystal-clear audio experience across a range of frequencies. The amplifier features a 120-watt output power along with an 8-inch woofer and a high-frequency driver that ensures a balanced sound reproduction. Whether you are playing soft tunes or energetic rhythms, the KX1200 responds dynamically, making it suitable for various musical genres.

One of the standout features of the KX1200 is its three-channel mixer, allowing musicians to connect multiple instruments and vocals simultaneously. Each channel boasts independent volume controls and EQ settings, ensuring that each source can be finely tuned to perfection. This flexibility makes it easy to blend different instruments and achieve a cohesive sound on stage.

The KX1200 also incorporates advanced effects processing, which adds depth and texture to your sound. With built-in reverb and delay effects, musicians can enrich their performances easily without the need for additional external processors. The onboard effects are intuitive and can be adjusted effortlessly, enhancing creativity during live shows.

Portability is essential for touring musicians, and the Behringer KX1200 excels in this regard. Despite its powerful output, the amplifier is lightweight and features a robust design, making it easy to transport. The durable construction ensures that it can withstand the rigors of frequent gigging, providing reliability for professional use.

Connectivity options on the KX1200 are extensive, featuring an array of inputs and outputs designed to cater to various setups. The inclusion of XLR and 1/4-inch inputs, along with stereo RCA inputs, provides compatibility with a range of devices, including keyboards, microphones, and backing tracks.

In summary, the Behringer KX1200 is a well-rounded keyboard amplifier that merges performance, portability, and functionality. With its powerful output, versatile mixer, built-in effects, and robust construction, it is an excellent choice for musicians seeking a reliable and high-quality amplifier for both practice and live performances.