Sterilite Point-of-Use Drinking Water System owner manual Troubleshooting Guide, Symptom

Page 11

Figure 26 (Internal Power Supply) Removing lamp

5.Loosen the lamp retention screw (External Power supply units–Figure 26).

6.Slide the lamp out carefully (Figures 26 and 27).

7.Insert the new lamp in the sleeve and reinstall the lamp.

8.Reinstall lamp wiring and the bottom cover.

9.Reinstall the filter as provided in the filter replacement instructions (see page 7).

10.Reconnect power.

The unit is now ready for operation.

Figure 27 (External Power Supply)

Removing lamp

TROUBLESHOOTING GUIDE

SYMPTOM

Unit leaking at tubing connection(s) after unit has been serviced.

Unit leaks around top cap after filter has been replaced.

Water is flowing from the unit at a very slow rate.

Lamp does not light when unit is operated.

No bubbles are visible in the incoming stream.

After removing unit for service, no bubbles are visible in unit when running.

Unit is mounted above counter with diverted valve assembly attached to the sink and partially drains when not in use.

POSSIBLE CAUSE

Tubing not securely connected and/or tubing lock ring not secured over tubing fitting.

O-ring on top is not properly seated.

Filter element plugged. Diverter screen plugged.

Inlet plugged.

No power.

Lamp burned out.

Filter is exhausted.

Inlet and oulet tubing has been reversed, causing reverse flow through the unit.

Diverted valve not fully closing when water is turned off.

POSSIBLE SOLUTION

Verify that tubing is properly connected and that the lock ring is engaged.

Verify O-ring is seated.

Replace filter.

Remove diverter valve from the faucet and clean the screen. Reverse flow to unit temporarily to remove blockage. This can be done by temporarily reversing inlet and outlet fittings.

Make sure power is available. Replace lamp.

Replace Filter.

Reverse tubing connections.

Push diverted valve in when unit is not in use.

11

Image 11
Contents Point-of-Use Drinking Water System Sterilight Unit USE Restrictions Unpacking & Inspection Wall Mounting InstallationStand Mounting Removing aeration nozzle and gasket Connecting to the FaucetAttaching diverter to Faucet OperationReplacing the Filter Please Note the FollowingDisconnecting outlet tube Replacing the UV Lamp Lower seal Slides overDo not Proceed Without Unplugging the Unit Symptom Troubleshooting GuideSWM Specifications Replaceable Parts List

Point-of-Use Drinking Water System specifications

The Sterilite Point-of-Use Drinking Water System is an advanced water purification solution designed to deliver safe and great-tasting drinking water directly from your tap. This innovative system utilizes a combination of cutting-edge technologies to ensure that your water is free from contaminants, while maintaining its natural minerals.

One of the standout features of the Sterilite system is its multi-stage filtration process. This system typically combines sediment filtration, activated carbon filtration, and a high-efficiency reverse osmosis membrane. The sediment filter removes larger particles such as dirt and rust, while the activated carbon filter effectively eliminates chlorine, volatile organic compounds (VOCs), and other harmful chemicals that can impact taste and odor. The reverse osmosis membrane then provides a fine level of filtration, targeting dissolved solids, heavy metals, and numerous other impurities.

Additionally, the Sterilite Point-of-Use Drinking Water System incorporates a mineral adding stage post-filtration. This feature enriches the water with essential minerals that can enhance taste and nutritional value, ensuring that you not only consume clean water but also enjoy its natural flavor.

The system is designed for convenience and ease of use. It typically comes with a sleek, compact design that fits seamlessly into modern kitchens. Installation is straightforward, allowing users to connect the system to their existing plumbing without the need for professional help. The intuitive user interface often includes LED indicators that signal when filters need replacement, making maintenance a hassle-free experience.

Furthermore, the Sterilite system emphasizes sustainability. By providing high-quality water from a point-of-use source, it significantly reduces the dependence on single-use plastic water bottles, thus contributing to environmental conservation efforts.

In summary, the Sterilite Point-of-Use Drinking Water System stands out for its robust filtration technologies, ease of installation, and user-friendly features. Its commitment to delivering safe, mineral-enriched drinking water makes it a viable choice for households seeking to enhance their hydration solutions while prioritizing health and environmental sustainability. With this system, you can enjoy the peace of mind that comes from knowing your drinking water is purified, convenient, and environmentally responsible.