Miele KWT4154UG1 Installation, Location, Ventilation, Before installation, Climate range

Page 29

Installation

This appliance must be built in; otherwise it could tip over.

To ensure that the appliance functions correctly in tropical climates where the ambient temperature exceeds 38°C and air humidity levels exceed 70%, the appliance MUST be used in a climate-controlled room.

Location

The appliance should be installed in a dry, well-ventilated room.

The room temperature should not go above or below the climate range for which the appliance is designed.

The higher the ambient temperature of the room, the more energy the appliance requires to operate.

The appliance should not be installed where it will be exposed to direct sunlight or directly adjacent to a heat-producing appliance such as an oven or a radiator.

Climate range

The appliance is designed for use within certain climate ranges (ambient temperatures), and should not be used outside this range. The climate range of the appliance is stated on the data plate inside the appliance.

Climate range

Ambient room

 

temperature

 

 

SN

+10°C to +32°C

N

+16°C to +32°C

ST

+18°C to +38°C

T

+18°C to +43°C

SN-ST

+10°C to +38°C

SN-T

+10°C to +43°C

 

 

If the appliance is used in a room that is too cold, the cooling system will switch off for too long, causing the internal temperature in the appliance to rise, with the risk of affecting the wine stored there.

Ventilation

The air at the back of the appliance gets warm. The appliance housing unit must be constructed to allow sufficient space for ventilation.

The air intake and outlet must not be covered or blocked in any way. They should be dusted on a regular basis.

Before installation

^Before building in, remove all accessories from the appliance.

^Remove any cable clips from the rear of the appliance.

^Check that all parts at the back of the appliance are unhindered. Carefully remove any hindrances.

29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents En CA Contents Contents Electrical safety Important Safety InstructionsUse InstallationDisposal of your old appliance Save These InstructionsDescription of the appliance Description of the appliance Disposal of an old appliance Caring for the environmentDisposal of packing materials Switching on and off Turning off for longer periods of time Temperature Optimum temperature and humiditySafety features Setting the temperatureTemperature range Temperature displayTemperature display will flash if Temperature display brightnessTurning on Dynamic Cooling Humidity levelAir exchange through the activate charcoal filter Turning off Dynamic CoolingInterior lighting Switching on the interior lightingAdjusting the brightness Capacity Storing wine bottlesWooden shelves Descriptive labelsActivating the alarm system AlarmTemperature alarm Door alarmDefrosting Before cleaning Cleaning and careCleaning the interior, door and accessories Ventilation slitsActive charcoal filter After cleaningDoor seal Problem-solving guide Interior light is not working Normal noises What causes them? NoisesAfter sales service Page Installation instructions Electrical connection Before installation InstallationLocation VentilationChanging the door hinging Changing the door hinging Appliance dimensions Under-counter installationAdjustments Preparing the applianceFitting the appliance into place Page Page Subject to change without notice Nr 873 220 KWT 4154 UG-1

KWT4154UG1 specifications

The Miele KWT4154UG1 is an advanced wine cooler designed to meet the needs of wine enthusiasts with a preference for elegance and functionality. This high-quality appliance offers the perfect environment for storing and aging wine, ensuring that each bottle is preserved at its finest. One of the standout features of the KWT4154UG1 is its precise temperature control, which is crucial for maintaining optimal conditions for different wine varieties. The unit offers a dual-zone cooling system, allowing users to store both red and white wines at their respective ideal temperatures.

With a temperature range of 41°F to 68°F, the KWT4154UG1 accommodates the preferences of wine connoisseurs while also ensuring that each bottle is served at the right temperature. The wine cooler employs Miele's proprietary PerfectFresh technology, which helps maintain the ideal humidity levels within the cabinet. This feature is essential for preserving cork integrity and preventing unpleasant oxidation, ultimately enhancing the wine's flavor profile.

The Miele KWT4154UG1 also boasts an innovative, energy-efficient design that supports sustainability efforts without compromising on performance. The unit is equipped with LED lighting, providing a gentle yet effective illumination that highlights the wine bottles while minimizing heat output and energy consumption.

Another impressive aspect of this wine cooler is its customizable shelving system. The shelves are crafted from high-quality wood, offering both aesthetics and functionality. They are designed to hold bottles securely, allowing for easy access while preventing vibrations that can disturb the wine. The KWT4154UG1 also features a sleek, glass door with UV protection, safeguarding the wine from harmful light exposure while providing a stylish display.

Miele's focus on user convenience is evident in the intuitive control interface, which allows easy adjustments to temperature settings, humidity levels, and lighting. The wine cooler is also designed with a silent operation mode, ensuring that it can be placed in various living spaces without causing disruptive noise.

In summary, the Miele KWT4154UG1 wine cooler combines sophisticated technology with elegant design, making it an exceptional choice for wine enthusiasts. With its advanced temperature and humidity control, energy-efficient features, and customizable interior, this appliance ensures that every bottle of wine is stored in the best possible conditions for enjoyment.
Top Page Image Contents