Fluke 3125 user manual Comments, Above

Page 16

3125 Detachable Hotplate

User’s Guide

Problem

Possible Causes and Solutions

The display shows any

Controller problem. The error messages signify the following problems with

of the following: err 1,

the controller.

err 2, err 3, err

Err 1 - a RAM error

4, Err 5, Err 6, or

Err 2 - a NVRAM error

Err 7

Err 3 - a Structure error

 

Err 4 - an ADC setup error

 

Err 5 - an ADC ready error

 

Err 6 – a defective control sensor

 

Err 7 – a heater error

 

Initialize the system by performing the Factory Reset Sequence describe

 

above.

Temperature cannot be

Incorrect High Limit parameter. The High Limit parameter may be set below

set above a certain point

400°C. Check this value as described in the 2200 User’s Guide.

4.2Comments

4.2.1EMC Directive

Hart Scientifics’ equipment has been tested to meet the European Electromag- netic Compatibility Directive (EMC Directive, 89/336/EEC). The Declaration of Conformity for your instrument lists the specific standards to which the unit was tested.

4.2.2Low Voltage Directive (Safety)

In order to comply with the European Low Voltage Directive (73/23/EEC), Hart Scientific equipment has been designed to meet the IEC 1010-1 (EN 61010-1) and the IEC 1010-2-010 (EN 61010-2-010) standards.

12

Page 15 Page 16
Image 16
Page 15 Page 16
Contents 3125 Limited Warranty & Limitation of Liability Table of Contents Page Symbols Used Before You StartSafety Information Detachable HotplateSafety Information Authorized Service Centers Fluke Corporation, Hart Scientific DivisionFluke Intl Corporation Page Controller and Hotplate Assembly IntroductionPage Specifications Specifications and Environmental ConditionsEnvironmental Conditions Page Troubleshooting Troubleshooting Problems, Possible Causes SolutionsComments Above

3125 specifications

The Fluke 3125 is a versatile and powerful digital multimeter designed for electrical technicians and engineers. This device stands out in the market for its precise measurements and rugged construction, making it ideal for both fieldwork and laboratory use.

One of the main features of the Fluke 3125 is its ability to measure a wide range of electrical parameters. With a measurement capability that includes AC and DC voltage up to 1000V, AC and DC current up to 10A, and resistance measurements up to 40MΩ, this multimeter is well-equipped to handle diverse applications. Additionally, it can perform continuity tests, diode tests, and frequency measurements, giving technicians the flexibility they need in various situations.

The Fluke 3125 employs advanced measurement technologies that enhance its performance. For example, it uses True RMS (Root Mean Square) measurement technology, which accurately measures the voltage and current levels of non-linear loads. This feature is especially important when working with fluctuating signals, ensuring reliable readings in real-world scenarios. Furthermore, the device is equipped with a built-in temperature measurement function, which adds an extra layer of utility for electricians dealing with HVAC systems or equipment testing.

Another notable characteristic of the Fluke 3125 is its robust design. Built to withstand tough environments, this multimeter is rated for drop protection and comes with a high IP rating, ensuring it is dust and splash resistant. The durability of the device makes it suitable for field operations where reliability is paramount. The user interface is also intuitive, with a large, backlit display that allows for easy reading of measurements in various lighting conditions.

Powering the Fluke 3125 is simple, as it operates on standard alkaline or rechargeable batteries, providing flexibility for users. Battery life is notably long, allowing technicians to work uninterrupted for extended periods. The device also features an auto-off function to conserve power when not in use, further enhancing its usability.

In summary, the Fluke 3125 is a multi-functional digital multimeter that combines accurate measurements, advanced technologies, and durability, making it an essential tool for professionals in the electrical field. Its wide measurement range and robust features ensure it meets the demands of various applications, whether in the lab, on-site, or in industrial settings.
Top Page Image Contents