Maytag RST2200, RST2400 warranty Operating the Controls, Adjusting the Temperature

Page 4

OPERATING THE CONTROLS

FREEZER

 

REFRIGERATOR

I

D-INITIASETTINGL

6-INITIALSETTING

I

 

 

 

G.GOLUFE3q'INGT

II-COLOSEITtNGST

 

Initial Setting of Controls

Freezer Control: This control has settings from A (warmest) to G (coldest). Initially set this eontrol to

D.

NOTE. The coldest freezer , _ttmg ,(G) !s 1

recommended for short term use only,

, , ". : ' :° " [ [

Refrigerator Control, This control has settings from 1 (warmest) to 11 (coldest). Initially set this control to

6. The refrigerator may" rnn for several hours when yon

first start it. This is normal.

Let the refrigerator run at least 8 to 12 hours before adding food• A day or so after adding food, you may decide one or both compartments should be colder

or warme_: If so, adjust the control(s) as instrncted below.

Adjusting the Temperature

Controls

Except when starting the refrigerator, do not change either control more than one number or letter at

a time. Allow '24 hours for the temperature to stabilize before resetting. Changing either control will have

some eft_et on the temperature of the other compartment.

Freezer too warm--Torn the freezer control to

the succeeding letter. For example, tuna the control from D to E.

Freezer too cold--Turn the freezer control to the preceding letter. For example, turn the control from D to C.

Refrigerator too warm--Turn the refrigerator

control to the next higher number. For example, torn the control from 6 to 7.

Refrigerator too eold--Tnrn the refrigerator control to the next lower number. For example, turn the control from 6 to 5.

Warm Cabinet Surfaces

Some portions of the cabinet may be warm to the touch. This is a normal tkmction of the refrigerator which helps prevent moisture from condensing on the

you first start your refrigerator, during hot weather and aftercabinetexcessive.Thisconditionorlengthy_x411bedooropeningsmorenoticeable. when

ADJUSTINGTHE INTERIOR

Cantilever Shelves

The refrigerator shelves are adjustable, all_wing you to arrange the shelving to t_t your family_ food storage

needs. Never attempt to adjust a shelf that is loaded with food.

To remove the refrigerator shclfl

1.Grasp the shelf at the front with one hand and push up under the shelf back with the other hand.

2.Lift the shelf straight out.

To rcplaee the refrigerator shelf:

I, Keep the shelf horizontal. Guide dm tabs into the slots in the shelf support at the back of the cabinet.

2. Lower the shell" until the tabs lock into position. Be sure the shelf is secure before loading it with fi)od.

Freezer Shelves

The freezer shelves can be removed or adjusted to accommodate large size packages and fbr cleaning.

PAGE 3

Image 4
Contents About Your Maytag Table of ContentsFor Future Reference Installation To level the refrigeratorGeneral Features Au to ma t icAdjusting the Temperature Operating the ControlsSpecial Storage Areas Gallon Pick-off Door BinsEgg Cradle Keepers and Tall Bottle RetainerFrozen Food Storage Food Storage TipsFresh Food Storage Food Storage Chart Fresh FruitsOod St orage Chart co ntinued ICE and Water Service Automatic Ice and Water DispenserIce Dispensing Water/Ice ControlSpill Tray Dispenser LightCare and Cleaning Cleaning the CondenserCleaning the Defrost Pan RefrigeratorRefrigerator Cleaning Chart Cleaning Agents Do not USE abrasive cleansing powders such asImportant Personal Safety Instructions NON-USE PeriodsConsumer Publications VacationsTo Avoid Unnecessary Service Calls TOO FrequentlyMaytag Refrigerator Warranty To Receive Warranty Service

RST2400, RST2200 specifications

Maytag is a well-known name in the appliance industry, and their RST2200 and RST2400 models stand out for their blend of performance, technology, and user-friendly features. Designed for efficiency and reliability, these washer-dryer combos make laundry days more manageable for homeowners.

The Maytag RST2200 is notable for its spacious drum capacity, which allows users to wash larger loads in a single cycle. This model also features a high-efficiency washer that uses advanced water and energy-saving technology, ensuring that clothes get cleaned effectively without excessive resource consumption. One of the standout features of the RST2200 is its PowerWash cycle, which combines extra cleaning action and a thorough rinse to tackle tough stains and dirt.

In addition to its cleaning prowess, the RST2200 offers various temperature settings and cycles tailored for different fabric types, giving users the flexibility they need. The intuitive control panel makes it easy to select options, while the built-in sensors adjust cycles for optimized performance, ensuring complete satisfaction with every load.

Moving on to the Maytag RST2400, this model takes things up a notch with additional features that enhance its usability. It boasts a larger wash drum than the RST2200, accommodating bulkier items like bedding or towels without issue. The RST2400 incorporates Maytag's Auto-Load Sense, a technology that determines the weight of the load and adjusts water levels accordingly. This feature not only simplifies the laundry process but also contributes to water conservation.

Both models offer a range of drying options, making it possible to go from wash to dry in one convenient cycle. The RST2400, in particular, has improved drying technology that ensures clothes come out fresh and wrinkle-free. Additionally, they both come with durable construction, backed by a solid warranty that reassures users of their long-term reliability.

With features designed to enhance cleanliness, efficiency, and ease of use, the Maytag RST2200 and RST2400 are excellent choices for any home. Their commitment to innovation ensures that laundry becomes less of a chore and more of a comfortable, efficient process.