Maytag UKF8001AXX-200 Refrigerator Doors and Drawer, Connect to Refrigerator

Page 5

Connect to Refrigerator

1.Remove plastic cap from water valve inlet port. Attach the copper tube to the valve inlet using a compression nut and sleeve as shown. Tighten the compression nut. Do not overtighten. Confirm copper tubing is secure by pulling on copper tubing.

2.Create a service loop with the copper tubing. Avoid kinks when coiling the copper tubing. Secure copper tubing to refrigerator cabinet with a “P” clamp.

A

B

C

D

A. Copper tubing

C. Compression nut

B. “P” clamp

D. Compression sleeve

3.Turn on water supply to refrigerator and check for leaks. Correct any leaks.

Complete the Installation

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

1.Plug into a grounded 3 prong outlet.

NOTE: Allow 24 hours to produce the first batch of ice. Discard the first three batches of ice produced. Allow 3 days to completely fill the ice container.

Refrigerator Doors and Drawer

All graphics referenced in the following instructions are included later in this section after “Final Steps.”

Remove and Replace Handles

To Remove Handles:

1.Grasp the lower part of the handle firmly, slide the handle up and pull the handle straight out from the door. See Handle graphic.

To Replace Handles:

1.Position the handle so that the large holes in the mounting clips are down and align the holes with the door studs.

2.Rotate the handle so that the mounting clips are flat against the door and slide the handle down to engage. See Handle graphic.

Remove Doors and Hinges

IMPORTANT:

■Remove food and any adjustable door or utility bins from doors.

■Keep the refrigerator doors closed until you are ready to lift them free from the cabinet.

NOTE: Provide additional support for the refrigerator door while the hinges are being removed. Do not depend on the door gasket magnets to hold the door in place while you are working.

TOOLS NEEDED: ⁵⁄₁₆", ³⁄₈", ¹⁄₄" hex-head socket wrench, Torx®† T20 screwdriver, #2 Phillips screwdriver, and a flat-blade screwdriver.

1.Unplug refrigerator or disconnect power.

2.Remove the base grille. Grasp the grille firmly and pull it toward you.

3.Starting with the right-hand side door, remove the parts for the top hinge as shown in Top Hinge graphic. Lift the refrigerator door from the bottom hinge pin.

4.Remove top hinge cover from left side refrigerator door.

5.Disconnect the wiring plug located on top of the hinge by wedging a flat-blade screwdriver or your fingernail between the two sections. See Connections graphic.

6.Disconnect the water line by pulling back on the locking collar while pulling the water line out of the water line connector. See Connections graphic.

7.Remove the parts for the top hinge as shown in Top Hinge graphic. Lift the left-hand side door from the bottom hinge pin.

8.Using a ³⁄₈" hex wrench, remove the leveling leg brackets from the bottom of the cabinet. Keep screws for later use.

†®TORX is a registered trademark of Textron Innovations Inc.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Refrigerator User Instructions Refrigerator SafetyClean Before Using Installation InstructionsUnpack the Refrigerator Before You Throw Away Your Old Refrigerator or FreezerRecommended Grounding Method Location RequirementsElectrical Requirements Connect the Water Supply Water Supply RequirementsWater Pressure Reverse Osmosis Water SupplyRefrigerator Doors and Drawer Complete the InstallationConnect to Refrigerator Remove and Replace HandlesRemove and Replace Freezer Drawer Replace Doors and HingesRemove Drawer Front Replace Drawer FrontBottom Hinges Using the Controls Adjust the DoorsRefrigerator USE Opening and Closing DoorsAdditional Features Adjusting the ControlsCondition Temperature Adjustment Cooling On/OffCrisper Humidity Control Water Filter Status Light and Filter ResetIce Maker and Ice Storage Bin Water and Ice DispensersTo Dispense Ice Water Filter Status LightTo Dispense Water Water Filtration System CleaningRefrigerator Care Refrigerator Operation TroubleshootingChanging the Light Bulb Ice and Water Temperature and MoistureWater and ice dispenser will not operate properly Water Filter CertificationsWater is leaking from the dispenser system Water from the dispenser is warmApplication Guidelines/Water Supply Parameters Performance Data SheetFirst Year Limited Warranty Parts and Labor Maytag Refrigeration Limited WarrantyItems Excluded from Warranty This limited warranty does not coverPage Sécurité DU Réfrigérateur Instructions Dutilisation DU RéfrigérateurDéballage du réfrigérateur Instructions D’INSTALLATIONExigences demplacement Raccordement de la canalisation deau Spécifications électriquesSpécifications de l’alimentation en eau Dépose et réinstallation des poignées Achever l’installationPortes et tiroir du réfrigérateur Raccordement au réfrigérateurRetirer et réinstaller le tiroir du congélateur Réinstallation des portes et des charnièresRéinstallation de la façade du tiroir Dépose des portes et des charnièresRéinstallation de la façade du tiroir Utilisation DU Réfrigérateur Utilisation des commandesAjustement des portes Ouverture et fermeture des portesCondition Ajustement DE LA Température Ajustement des commandesRefroidissement On/Off marche/arrêt Pour réinstaller le bac d’entreposage à glaçons Témoin lumineux du filtre à eau et réinstallation du filtreMachine à glaçons et bac d’entreposage Réglage de lhumidité dans le bac à légumesTaux de production de glaçons Distributeurs d’eau et de glaçonsDistribution d’eau Distribution de glaceTémoin lumineux de l’état du filtre à eau Remplacement du filtre à eauSystème de filtration de leau La lampe du distributeurNettoyage Entretien DU RéfrigérateurFonctionnement du réfrigérateur Remplacement de l’ampoule d’éclairageDépannage Glaçons et eau Température et humiditéGoût, odeur ou couleur grise des glaçons Les glaçons sont creux ou petits’eau coule du système de distribution Leau du distributeur est tièdeSystème de filtration d’eau intérieur Feuille DE Données SUR LA PerformanceLa présente garantie limitée ne couvre pas MaytagÉléments Exclus DE LA Garantie Maytag Brand Home Appliances Page Page Page W10314958A SP PN W10314959A

UKF8001AXX-200 specifications

The Maytag UKF8001AXX-200 is a premium water filter designed to provide households with clean and refreshing drinking water straight from the refrigerator. Known for its exceptional filtration capabilities, this filter is an essential accessory for those looking to upgrade their water quality while ensuring the longevity and performance of their appliances.

One of the primary features of the UKF8001AXX-200 is its advanced filtration technology, which includes the ability to reduce a wide range of contaminants. It effectively minimizes chlorine taste and odor, lead, mercury, and various other impurities that may be present in municipal water supplies. This ensures that every sip is free from any undesirable flavors or substances, offering peace of mind to homeowners.

The filter utilizes a carbon block filter system, which maximizes the surface area for contaminant adsorption. This design increases the filter's efficiency, allowing it to capture more impurities while maintaining a steady flow rate of clean water. It is rated to filter up to 200 gallons of water before needing replacement, making it a long-lasting solution for busy households.

Another outstanding characteristic of the Maytag UKF8001AXX-200 is its easy installation process. Designed to fit seamlessly into specific Maytag refrigerator models, the filter can be replaced quickly without the need for additional tools. The user-friendly design also includes a filter change indicator, which alerts users when it's time to replace the filter, ensuring that water quality is never compromised.

Additionally, the UKF8001AXX-200 is designed with sustainability in mind. By using a water filter, households can significantly reduce their reliance on bottled water, thus minimizing plastic waste and contributing to environmental conservation.

Overall, the Maytag UKF8001AXX-200 water filter stands out as a top choice for consumers who prioritize water quality and convenience. Its robust filtration, ease of use, and environmental benefits make it a valuable addition to any kitchen. For families seeking delightful-tasting water free from contaminants, the UKF8001AXX-200 delivers reliable and consistent performance, enhancing everyday hydration and overall well-being.
Top Page Image Contents