GE JV694 Secure the hood to the cabinet, Replace the access cover, Mount the cabinet on the wall

Page 6

INSTALLATION INSTRUCTIONS

8. Secure the hood to the cabinet.

Align the hood with the sides and front edge of the cabinet. Tighten the screws in each mounting bracket. Place plastic caps (provided) over the ends of these screws from the inside of the cabinet.

Install two (2) additional screws into the cabinet bottom, through the front mounting holes along the front edge of the hood.

9. Replace the access cover.

Secure the access cover with the two (2) screws removed in step 5.

10. Mount the cabinet on the wall.

Make sure the cabinet is securely attached to the wall and/or adjoining cabinets. The mounted cabinet must be able to support the added weight of the hood.

11. Attach the ductwork and the front trim.

Complete the ductwork from the hood to the outside using a roof cap or elbow and wall cap. Tape all joints. Shelves may be installed if trimmed to clear the ductwork.

The front trim piece covers the gap between the housing and the front edge of the cabinet cut-out. Mount the front trim to the housing with two (2) screws (provided).

12. Connect the electrical wiring.

Remove the wire box cover. Attach the power cable to the hood using the proper connector. Connect black to black, white to white and green or bare wire to ground screw. Replace the wire box cover.

CAUTION: DO NOT TURN THE BREAKER ON OR INSERT THE HOUSE FUSE AT THIS TIME.

6

13. Install the glass visor assembly.

VISOR

TRIM

VISOR

SLIDE

Slide the glass into the visor slides, above each visor clamp (see the illustration in step 14). Align the visor trim and tighten the thumb screws to secure the glass.

To remove the glass visor:

Simply loosen the thumb screws and pull the glass from the visor slides.

14. Fine adjustments to the visor trim position.

VISOR

CLAMP

The visor slides each have a screw for adjusting the height of the visor trim, if necessary. The vertical adjustment screw allows the top and bottom edges of the visor trim to be matched with the control trim.

15.Connect the power.

16.Check operation.

Image 6
Contents Use and Care & Installation Guide Operating Instructions ControlsAutomatic Heat Sensor Care and CleaningLight Bulb Replacement FilterInstallation Instructions Mark and cut out the cabinet bottomRemove the access cover Open the filter panel Attach the damper/duct connectorSet the housing into the opening Install the mounting bracketsInstall the glass visor assembly Replace the access coverConnect the electrical wiring Fine adjustments to the visor trim positionWe’ll Be There Warranty
Related manuals
Manual 8 pages 28.03 Kb

JV960, JV694, JV695, JV696 specifications

The GE JV694 is a standout model in the world of gas ranges, especially appealing to those who crave a blend of modern technology with traditional cooking appeal. With a focus on performance, durability, and design, the JV694 is engineered to meet the demands of contemporary kitchens.

One of the primary features of the GE JV694 is its powerful, high-output burners. It includes a maximum output burner that delivers intense heat, perfect for high-heat cooking techniques such as searing and boiling. The consistency of heat distribution is ensured through even burner design, allowing for perfectly cooked meals every time, whether you are making sauces, stews, or sautéing vegetables.

The range also boasts a convection oven, an advanced technology that uses a fan and a third heating element to circulate hot air around the food. This results in a more even cooking temperature and reduces cooking times. Convection is particularly advantageous when baking, as it creates a uniform temperature throughout the oven, leading to better rise and browning.

Another notable feature of the GE JV694 is its self-cleaning capability. This function allows users to maintain a clean cooking space without the hassle of manual scrubbing. It utilizes high temperatures to burn off residue, converting it into ash that can be easily wiped away. This time-saving technology is perfect for the busy home cook.

In terms of design, the GE JV694 presents a sleek and modern look, featuring stainless steel finishes that are not only stylish but also resistant to fingerprints and smudges. The standout control panel features LED backlit knobs, which offer precise control and a contemporary aesthetic.

Safety is also a priority with the GE JV694. It includes features such as a safety shut-off function, an oven lock, and a flame failure device that ensures peace of mind while cooking.

Overall, the GE JV694 represents a harmonious balance of functionality, style, and advanced technologies. With its array of features tailored for a seamless cooking experience, this gas range is an excellent choice for anyone looking to enhance their kitchen capabilities while enjoying the artistry of cooking.