Grill Safety, Consumer Safety Information

Grill Safety

IMPORTANT SAFEGUARDS

In order to prevent the risk of fire, electric shock, burns or other injury or damage, follow these instructions carefully. When using electrical appliances, basic safety precautions should always be followed including the following:

1.Read all instructions.

2.Do not touch hot surfaces. Use handles or knobs.

3.To protect against risk of electrical shock, do not immerse appliance, cord or plug in water or other liquid.

4.Close supervision is necessary when any appliance is used by or near children.

5.Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.

6.Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or is dropped or damaged in any manner. Call our toll-free customer assistance number for informa- tion on examination, repair or electrical or mechanical adjustment.

7.Do not use outdoors.

8.The use of accessory attachments not recommended by the appliance manufacturer may cause injuries or serious damage to the unit.

9.Do not let cord hang over edge of table or counter, or touch hot surfaces, including stove.

10.Do not place on or near a hot gas or electric burner, or in a heated oven.

11.Extreme caution must be used when moving an appliance containing hot oil or other hot liquids.

12.To disconnect, turn any control to “OFF,” then remove plug from wall outlet.

13.Do not use appliance for other than intended purpose.

14.For units with detachable cooking plates, be sure they are secured before cooking.

SAVE THESE INSTRUCTIONS!

Consumer Safety Information

This appliance is intended for household use only.

This appliance is equipped with a grounded- type 3-wire cord (3-prong plug). This type of plug will only fit into an electrical outlet made for a 3-prong plug. This is a safety feature intended to help reduce the risk of electrical shock. If the plug should fail to fit contact a qualified electrician to replace the obsolete outlet. Do not attempt to defeat the safety purpose of the grounding pin by modifying the plug in any way.

To reduce risk of electrical shock, do not immerse the grill in water.

To avoid an electrical circuit overload do not use another high wattage appliance on the same circuit with the grill.

The length of the cord used on this appliance was selected to reduce the hazards of becoming tangled in, or tripping over a longer cord. If a longer cord is necessary a grounded type 3-wire extension cord may be used. The electrical rating of the extension cord must be equal to or greater than the rating of the grill. Care must be taken to arrange the extension cord so that it will not drape over the countertop or tabletop where it can be pulled on by children or accidental- ly tripped over.

An extension cord should be connected to the appliance first, before it is plugged into the outlet.

CAUTION: Escaping steam can burn. Always use a hot mitt to protect hand when opening the grill.

106621, 840071500 specifications

The GE 106621,840071500 is a sophisticated piece of equipment that stands out in its category due to its advanced features and innovative technologies. This model is particularly known for its robustness and reliability, making it a trusted choice among users in various industries.

One of the main features of the GE 106621,840071500 is its high-performance motor, which offers superior torque and efficiency. This motor is designed to operate under heavy loads while maintaining low energy consumption, thereby maximizing operational efficiency and reducing overall energy costs. Its durability ensures that it can withstand demanding environments, making it suitable for both industrial and commercial applications.

In terms of technology, the GE 106621,840071500 incorporates cutting-edge control systems that enhance its performance and usability. These control systems allow for precise monitoring and adjustments, enabling operators to optimize performance based on specific operational needs. Additionally, the integration of smart technology provides users with real-time data analytics, facilitating proactive maintenance and reducing downtime.

One of the standout characteristics of the GE 106621,840071500 is its modular design, which allows for easy customization and scalability. This is particularly advantageous for businesses that anticipate growth or varying operational demands. The modularity not only simplifies upgrades but also reduces the complexity associated with repairs and maintenance.

Furthermore, the GE 106621,840071500 is equipped with advanced safety features that comply with international standards. These safety mechanisms are designed to protect both the equipment and the operators, further bolstering its appeal in sectors that prioritize safety and risk management.

The combination of high efficiency, advanced technology, and robust safety features makes the GE 106621,840071500 an exceptional choice for organizations looking to enhance their operational capabilities. Users can expect a reliable and high-performing system that is tailored to meet the challenges of modern operational demands while delivering significant long-term value. Overall, the GE 106621,840071500 exemplifies the high standards for quality and innovation that General Electric is renowned for in the industry.