HOW to USE the Kitchen Timer

The Kitchen Timer

The Kitchen Timer has 3 timing functions:

•It operates as a minute timer.

•It can be set to delay cooking.

•It can be used as a hold setting after defrosting.

The Kitchen Timer operates without microwave energy.

Using a Holding Time

The Kitchen Timer can also be used to program a “holding time” between microwave cooking functions. The time can range from 1 second to 99 minutes and 99 seconds. A holding or standing time may be found in some of your own recipes or in a cookbook.

How to Time a 3-Minute Phone Call

Step 1: Touch KITCHEN TIMER pad.

Step 2: Touch number pad 3 and MINUTE pad (for 3 minutes and no seconds).

Step 3: Touch START. Display shows time counting down. The timer signals when time is up.

Programming Delayed Cooking

To delay cooking up to 99 minutes and 99 seconds, touch either MICRO COOK, TEMP COOK/HOLD or COMBINATION ROAST and enter cook time, temperature or code. Touch KITCHEN TIMER and enter number of minutes to delay cooking. When delaying Temp Cook/Hold or Combination Roast cooking, be sure probe is in food. Touch START. Timer will count down to zero and cooking will begin.

NOTE: Cooling fan comes on during delay time.

How to Defrost, Hold and Micro Cook

Let’s say you want to defrost a frozen casserole for

15 minutes, hold for 10 minutes and then Micro Cook for 25 minutes. Here’s how to do it:

Step 1: Take casserole from freezer and place in oven.

Step 2: Touch TIME DEFROST pad.

TIME

DEFROST

Step 4: Set standing or hold time by KITCHEN touching KITCHEN TIMER pad.

TIMER

Step 5: Touch 1, 0 and MINUTE to hold for 10 minutes.

Step 6: Touch MICRO COOK pad.

MICRO

COOK

Step 3: Touch pads 1, 5 and MINUTE for 15 minutes defrosting time. (Defrosting is automatically set

on power level 3 but can be changed by touching the POWER LEVEL pad and the desired power level 1–10.)

Step 7: Touch 2, 5 and MINUTE for 25 minutes of cooking time.

Step 8: Touch START. As each function START is automatically performed, oven display

shows instructions entered and the function. When time is up, the oven signals and flashes “End.”

JEB1095 specifications

The GE JEB1095 is a state-of-the-art jet engine that has made significant strides in aerospace technology. Known for its exceptional performance and reliability, it’s designed for both commercial and military aircraft applications. This engine exemplifies GE’s commitment to innovation and efficiency in the aviation industry.

One of the standout features of the JEB1095 is its advanced turbofan design. It incorporates a wide-chord fan that enhances efficiency at various speed ranges, providing a significant reduction in fuel consumption. This makes the engine not only cost-effective for operators but also more environmentally friendly, aligning with the global push for sustainable aviation.

The JEB1095 is equipped with a sophisticated digital engine control system. This technology allows for precise monitoring and adjustments of engine parameters in real-time. By optimizing performance during different flight phases, it ensures maximum efficiency and optimal thrust delivery. Pilots benefit from increased situational awareness, which additionally contributes to enhanced safety in operations.

Another key characteristic of the JEB1095 is its durability and long lifecycle. The engine features advanced materials, including lightweight composites and titanium alloys, which improve its structural integrity while reducing overall weight. These materials are designed to withstand extreme temperatures and pressures, resulting in longer maintenance intervals and reduced operating costs.

The engine’s noise reduction technology is also notable. It employs a series of acoustic treatments and advanced fan blade designs that minimize noise during takeoff and landing phases. This is particularly beneficial for commercial operations, as it helps airports comply with stringent noise regulations while improving the experience for passengers and surrounding communities.

In conclusion, the GE JEB1095 is a remarkable example of modern engineering in the aviation sector. Its combination of efficiency, advanced technology, and durability positions it as a top choice for airlines and military operators alike. As the aerospace industry continues to evolve, the JEB1095 sets a benchmark for performance, paving the way for future innovations in jet engine design. Its commitment to sustainability and efficiency makes it a pivotal player in the ongoing transformation of air travel.