Prepare the opening

PSB2201NSS

GE Profile Advantium® 240 Wall Oven

Preparation with an Accessory Drawer

The Advantium 240V can be installed in combination with other GE/Monogram appliances. Always follow each product's Installation Instructions to compete the installation.

Single Advantium 240V Installation:

Order a 30" wide single oven cabinet or cut the opening in a wall to the dimensions shown.

* For existing cutouts, a

			23-1/2”
maximum width of 28-1/2" is	30”		23-1/2”
maximum width of 28-1/2" is
acceptable. If the opening is
slightly wider, secure a furring
slightly wider, secure a furring			25-1/4”
strip on each side of the			25-1/4”
strip on each side of the			Min.
cutout for securing the oven.
• Always maintain 36-3/4"
• Always maintain 36-3/4"		21”

Prepare the opening (cont.)

When installed over a single oven or a warming drawer, allow at least 2" between the two openings. This separation will provide clearance for bottom overlap of the Advantium 240V and the other appliance overlaps.

Construct a solid oven floor of 3/8" min. thick plywood supported by 2 x 4 or 2 x 2 runners on all sides.

•the support must be level and rigidly mounted, flush with the bottom edge of the cutout.

Installation over a GE/Monogram Oven and Warming Drawer:

			Construct Solid
	30”	23-1/2”	Bottom Min.
			3/8” Plywood
			Supported by
			2x4 or 2x2
		25-1/4”	Runners all
		25-1/4”	Four Sides
		Min.
		21”	2” Min.
			(3” recommended
			Per Oven
			Requirement
5” min.
from ﬂoor			2” Min.
1” min.			2” Min.
1” min.
above	Per warming drawer requirement
toekick

minimum height from		Construct


the floor to the cutout in		Base
any single or combined		Min. 3/8”
any single or combined	5” min.	Plywood
installation.	from ﬂoor	Supported
	from ﬂoor	by 2x4 or 2
	1” min.	by 2x4 or 2
• Allow 3/4" to 2-1/8" case trim	1” min.	Runners all
• Allow 3/4" to 2-1/8" case trim	above	Four Sides
overlap on the sides and 7/8"	toekick
overlap on the sides and 7/8"
overlap on the bottom of
the opening for all models.
The amount of overlap on
the sides depends on the actual cutout width. Allow 1-1/4" case
trim overlap on the top for models PSB2200 and PSB2201 and for
models ZSC2200, ZSC2201 and ZSC2202.

• Oven overlaps will conceal cut edges on all sides of the opening.

30”

21”

5” min. from ﬂoor 1” min. above toekick

23-1/2”	Construct
	Solid Bottom
	Min. 3/8”
	Plywood
	Supported
25-1/4”	by 2x4 or 2x2
Min.	Runners all
	Four Sides

		2” Min.
		(3” recommended

			Per warming
			drawer
			requirement

*For existing cutouts, a maximum width of

28-1/2" is acceptable. If the opening is slightly wider, secure a furring strip on each side of the cutout for securing the oven.

Note: Additional clearances between the cutouts may be required. Check to be sure the oven supports above the Warming Drawer location do not obstruct the required interior depth and height. See Warming Drawer installation instructions for details.

Caution: For personal safety, the mounting surface must be capable of supporting the

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

*For existing cutouts, a maximum width of

28-1/2" is acceptable. If the opening is slightly

wider, secure a furring strip on each side of the cutout for securing the oven.

cabinet load, in addition to the added weight of this approximate 80-pound oven and 30- pound drawer, plus additional oven loads of up to 50 pounds or a total weight of 160 pounds.

Listed by

Underwriters

Laboratories

Specification Created 9/08

240441

PSB2201NSS specifications

The GE PSB2201NSS is a highly regarded side-by-side refrigerator that brings together stylish design, advanced technology, and user-friendly features. This model stands out with its sleek stainless steel finish, adding a modern touch to any kitchen decor, while also being resistant to fingerprints. The refrigerator's dimensions make it a suitable choice for various kitchen sizes, offering plenty of space without overwhelming the room.

One of the defining characteristics of the GE PSB2201NSS is its spacious interior, with an impressive total capacity of 21.9 cubic feet. The storage is intelligently designed, featuring adjustable shelves and multiple bins that allow users to customize their layout according to their storage needs. The door shelving is particularly spacious, accommodating taller bottles and containers, ensuring easy access to frequently used items.

In terms of cooling technology, this model employs advanced Temperature Management System, which helps maintain optimal temperatures throughout the refrigerator and freezer compartments. The electronic controls provide precise temperature adjustments for both sections, ensuring that food items remain fresh for longer periods. Additionally, the refrigerator comes equipped with an advanced compressor that minimizes energy consumption while maximizing cooling efficiency.

The GE PSB2201NSS is also designed with convenience in mind. It features an advanced water and ice dispenser located on the front door, providing easy access to filtered water and ice without needing to open the fridge. The dispenser's design minimizes spills and mess, making it user-friendly.

Additionally, the refrigerator has a robust filtration system that ensures clean and fresh water, free from impurities. This is especially beneficial for families, promoting healthier hydration options.

Another notable feature is the Energy Star certification, which ensures that the appliance meets strict energy efficiency guidelines, helping to reduce utility bills and environmental impact.

Overall, the GE PSB2201NSS offers a combination of modern design, extensive storage options, advanced cooling technologies, and convenient features, making it a worthy addition to any home. Whether you're a culinary enthusiast or a busy family, this side-by-side refrigerator provides the functionality and reliability needed for everyday use.